11. Help
83
For assistance, please contact an authorized Panasonic dealer.
“Fax in Memory”LThe unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
104.
LIf the PC fax setting (feature #442 on page 65) is set to “Always”,
– check the connection between the computer and the unit.
– check that the computer is turned ON.
LIf the fax preview mode (feature #448 on page 52) is set to “On”,
– view, print or save the received fax documents (page 48, 49, 52), and
then erase the unnecessary documents (page 49).
– turn the setting to “Off”. The fax documents stored in memory will be
printed automatically.
– set feature #449 (page 65) to “On”, and then print the received fax
documents (page 49).
“File Size Over”LWhen performing scan to FTP server, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
“Keep Copying”LCopying has stopped due to some existing problem (Example: a lack of
recording paper or a recording paper jam). See the other displayed
message instructions to continue copying.
“Left Cover Open”LThe left cover is open. Close it.
“Low Temperature”LThe inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area.
“Memory Full”LWhen performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
LWhen making a copy, the document being stored exceeded the memory
capacity of the unit. Press {Stop} to clear the message. Divide the
document into sections.
“Memory Overflow”LWhen printing a file, the document being stored exceeded the memory
capacity of the unit. Press {Stop} to clear the message. Change the printer
settings (page 28).
“Modem Error”LThere is something wrong with the unit’s modem. Contact our service
personnel.
“No Fax Reply”LThe other party’s fax machine is busy or has run out of recording paper. Try
again.
“Out of Paper Input Tray
#1”
LRecording paper is not loaded or the paper input tray has run out of paper.
Load paper (page 14).
LRecording paper was not fed into the unit properly. Load the paper again
(page 14).
Note:
L“#1”: Standard input tray
L“#2”: Lower input tray
L“#1+#2”: Standard input tray and lower input tray
“Paper Jammed”LA recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper (page 94).
“PC Fail or Busy.”LThe cable or the computer power cord is not connected correctly. Check the
connections (page 17, 25).
LThe software is not running on the computer. Restart the software and try
again.
“Please Wait”LThe unit is warming up. Wait for a while.
Display Cause & Solution