If the camera works normally | Casio EX-S2/EX-M2 instruction

GETTING READY

■If the camera works normally

1.Continue using the camera until the current charge is used up, and then charge the battery.

■If the camera does not work normally

This can mean there is a problem with how the battery is loaded.

1.Remove the battery from the camera and check the battery contacts for dirt. If the contacts are dirty, wipe them clean with a dry cloth.

2.Check to make sure that the AC adaptor’s power cord is connected securely to the power outlet and cradle.

•If the same symptoms occur again when you place the camera on the cradle after taking the above steps, contact a CASIO authorized service center.

■Battery Life Guidelines

The battery life guideline values given below indicate the amount of time at standard temperature (25° C) until power automatically turns off due to battery failure. They do not guarantee that the battery will provide the amount of service indicated. Low temperatures and continued use reduce bat- tery life.

	Operation	Approximate Battery Life

	Continuous Recording*1	65 minutes (390 shots)
	Continuous Playback*2	110 minutes
	(Continuous Snapshot Recording)	110 minutes
	(Continuous Snapshot Recording)

	Continuous Voice Recording*3	80 minutes
	Continuous Audio Playback*3	330 minutes

*1 Continuous Recording Conditions

•Normal temperature: 25° C (77° F)

•Flash: Off

•Monitor screen: Off

•Image recorded about every 10 seconds

*2 Continuous Playback Conditions

•Normal temperature: 25° C (77° F)

•Scroll one image about every 10 seconds

*3 Voice recording and audio playback times apply to the EX-M2 only.

26

Image 26

Casio EX-S2/EX-M2 manual If the camera works normally, If the camera does not work normally, Battery Life Guidelines

Contents

EX-S2/EX-M2 Introduction Unpacking Contents Deleting Files Other Settings Playing AN Audio File EX-M2 Only Transferring Files to a Computer Copyright Restrictions Features EX-M2 Only General PrecautionsPrecautions Introduction Data Error Precautions Operating conditions Lens CondensationLED Backlight Other Quick Start Guide Getting Ready To record an image Click the controller to delete the selected image To view a recorded imageTo delete an image General Guide Getting ReadyCamera Front Bottom Removing the Connector CoverUSB Cradle Using the Controller Monitor Screen Contents Play Mode Indicator Lamps Attaching the Strap To load the battery Power Requirements Set the camera onto the USB cradle To charge the batteryTurn off the camera and remove its connector cover Getting Ready If the camera does not work normally Battery Life GuidelinesIf the camera works normally Tip to Make the Battery Last Longer Low Battery Indicator USB Cradle and AC Adaptor Precautions Power Supply PrecautionsBattery Precautions Auto Power Off APO Turning the Camera On and Off Menu Screen Operations Using the On-screen MenusPress Menu Next, do either of the following Configuring Display Language and Clock Settings Getting Ready Basic Image Recording Recording an Image About the REC Mode Monitor Screen Recording Precautions Using Zoom Using the Flash Flash Precautions About Red-eye Reduction Using the Self-timer To specify the image size Specifying Image Size and Quality To specify the image quality Other Recording Functions Exposure Compensation EV Shift Adjusting the White Balance REC mode, press Menu Adjusting White Balance Manually Proce- dure under Adjusting the White Balance, select Manual Using the Best Shot Mode Click the controller Using the Movie Mode Rock the controller Up or down to select Movie, and then Click Adding Audio to a Snapshot Recording Audio EX-M2 Only Recording Your Voice Press the shutter release button to start audio recording Audio Recording Precautions Press the shutter release button to start voice recording Turning Image Review On and Off REC Mode Camera SettingsTurning the Monitor Screen On and Off Assigning Functions to the Controller Specifying Power On Default Settings Playback Basic Playback Operation Playing an Audio Snapshot EX-M2 Only Zooming the Displayed Image Press Menu to return the image to its original size Resizing an Image Play mode Playing a Movie Adding Audio to a Snapshot EX-M2 Only To re-record audio Playing Back a Voice Recording File EX-M2 Only Click the controller to delete the file Deleting FilesDeleting a Single File Press Menu to exit the menu screen Deleting All Files Click the controller to delete all the files Folders File ManagementMemory Folders and Files To protect a single file Protecting Files Dpof Settings File Name To protect all files in memory To configure print settings for a single image To insert the date during printing To configure print settings for all images Click the controller to complete the procedure Print Image Matching Exif Print Using the Favorite Folder To copy a file to the Favorite folder To display a file in the Favorite folder To delete a file from the Favorite folder Specifying an Image for the Startup Screen Other SettingsTurning the Key Tone On and Off Changing the Date and Time Setting Click to register the settings and exit the set- ting screen Changing the Date Format Changing the Display LanguagePage Using a Memory Card To remove a memory card from the camera Using a Memory CardTo insert a memory card into the camera Formatting a Memory Card Copying Files Memory Card PrecautionsTo copy all the files in built-in memory to a memory card To copy a file from a memory card to built-in memory About the bundled CD-ROM Using the Camera with a ComputerInstalling the Software from the CD-ROM Photo Loader for Windows/Macintosh Macintosh Computer System RequirementsWindows Selecting a Language Installing Software from the CD-ROM in WindowsGetting Started Viewing the Contents of the Read me File Installing an Application Exiting the Menu Application Installing SoftwareInstalling Software from the CD-ROM on a Macintosh On the menu screen, click Exit to exit the menu To install Acrobat Reader To install Internet Explorer and Outlook ExpressTo install Photo Loader Installing the USB Driver To uninstall the USB driver To view the camera user’s guide To read the Photo Loader user’s guide Transferring Files Over a USB Connec- tion Transferring Files to a Computer To connect the USB Cable Turn off the camera and remove its connector cover Using a Memory Card to Transfer Images to a Computer Terminating a USB Connection DCF Protocol Using a Commercially Available SD Memory Card Reader/WriterMemory Data Directory Structure Folder and File ContentsMemory Directory Structure Built-in Memory and Memory Card Precautions Image Files Supported by the Camera Playing AN Audio File EX-M2 Only Transferring Audio Files to the Camera Playing AN Audio File EX-M2 Only Align the mode selector with AudioPreparing the Camera for Audio Player Operation General Guide Using the Camera as an Audio PlayerLCD Remote Controller Playing AN Audio File EX-M2 Only Display Basic Remote Controller Operations 100 101 Specifying the Audio Playback ModeSelecting a Specify Track for Playback Audio mode, start audio playback Specifying the Track Playback Sequence 102 Example Folder Structure Example PLAYLIST.TXT File Contents103 Disabling Remote Controller Button Operations 104 105 LCD Remote Control Error MessagesAudio Playback Precautions Menu Reference Appendix106 107 Camera Indicator LampsIndicator Lamp Reference Play tab menu Audio Mode EX-M2 only 108 USB Cradle Indicator Lamps 109 Troubleshooting Guide 110 111 112 Display Messages 113 114 Main SpecificationsSpecifications Camera Functions 115 Exposure Control Audio Player Function EX-M2 Only Power Supply116 Other LCD Remote Controller Bundled with EX-M2 Only117 USB Cradle