Casio EX-S2/EX-M2 instruction

USING THE CAMERA WITH A COMPUTER

5.Turn off the camera and remove its connector cover.

Connector cover

6. Making sure that the camera is turned off, set it onto the USB cradle.

• Do not place the camera onto the USB cradle while it is turned on.

7.Turn on the camera.

•When you turn on the camera, it enters the USB Mode and automatically transfers the files in camera memory to the computer.

•While the camera is in the USB Mode, the USB lamp on the cradle lights green (page 109).

IMPORTANT!

•Be sure to read the applicable information in the user documentation that comes with your computer before connecting the USB cradle.

•Do not leave the same image displayed on your com- puter screen for a long time. Doing so can cause the image to “burn in” on the screen.

•Take care when connecting the USB cable to the USB cradle. The USB port and the cable plug are shaped for proper positioning.

•Plug the USB cable into the ports securely as far as it will go. Proper operation is not possible if connections are not correct.

•Be sure to connect the AC adaptor to the USB cradle to supply power to the camera.

•The optionally available CASIO QC-1U USB cable cannot be used with this camera.

•Never disconnect the USB cable while the PC is ac- cessing camera memory (indicated by a flashing USB lamp). Doing so can cause data to become corrupted.

•You can perform data communication in either the REC mode or PLAY mode.

91

Image 91

Casio EX-S2/EX-M2 manual Turn off the camera and remove its connector cover

Contents

EX-S2/EX-M2 Unpacking Introduction Contents Deleting Files Other Settings Transferring Files to a Computer Playing AN Audio File EX-M2 Only Copyright Restrictions Features Precautions General PrecautionsEX-M2 Only Introduction Operating conditions Data Error Precautions LED Backlight CondensationLens Other Getting Ready Quick Start Guide To record an image To delete an image To view a recorded imageClick the controller to delete the selected image Front Getting ReadyCamera General Guide USB Cradle Removing the Connector CoverBottom Using the Controller Monitor Screen Contents Play Mode Attaching the Strap Indicator Lamps Power Requirements To load the battery Turn off the camera and remove its connector cover To charge the batterySet the camera onto the USB cradle Getting Ready If the camera works normally Battery Life GuidelinesIf the camera does not work normally Low Battery Indicator Tip to Make the Battery Last Longer Battery Precautions Power Supply PrecautionsUSB Cradle and AC Adaptor Precautions Turning the Camera On and Off Auto Power Off APO Press Menu Using the On-screen MenusMenu Screen Operations Next, do either of the following Configuring Display Language and Clock Settings Getting Ready Recording an Image Basic Image Recording Recording Precautions About the REC Mode Monitor Screen Using Zoom Using the Flash About Red-eye Reduction Flash Precautions Using the Self-timer Specifying Image Size and Quality To specify the image size To specify the image quality Exposure Compensation EV Shift Other Recording Functions REC mode, press Menu Adjusting the White Balance Proce- dure under Adjusting the White Balance, select Manual Adjusting White Balance Manually Click the controller Using the Best Shot Mode Using the Movie Mode Up or down to select Movie, and then Click Rock the controller Recording Audio EX-M2 Only Adding Audio to a Snapshot Press the shutter release button to start audio recording Recording Your Voice Press the shutter release button to start voice recording Audio Recording Precautions Turning the Monitor Screen On and Off REC Mode Camera SettingsTurning Image Review On and Off Assigning Functions to the Controller Specifying Power On Default Settings Basic Playback Operation Playback Playing an Audio Snapshot EX-M2 Only Press Menu to return the image to its original size Zooming the Displayed Image Resizing an Image Playing a Movie Play mode Adding Audio to a Snapshot EX-M2 Only To re-record audio Playing Back a Voice Recording File EX-M2 Only Press Menu to exit the menu screen Deleting FilesDeleting a Single File Click the controller to delete the file Click the controller to delete all the files Deleting All Files Memory Folders and Files File ManagementFolders Protecting Files To protect a single file To protect all files in memory Dpof Settings File Name To insert the date during printing To configure print settings for a single image Click the controller to complete the procedure To configure print settings for all images Exif Print Print Image Matching To copy a file to the Favorite folder Using the Favorite Folder To delete a file from the Favorite folder To display a file in the Favorite folder Turning the Key Tone On and Off Other SettingsSpecifying an Image for the Startup Screen Click to register the settings and exit the set- ting screen Changing the Date and Time Setting Changing the Display Language Changing the Date FormatPage Using a Memory Card To insert a memory card into the camera Using a Memory CardTo remove a memory card from the camera Formatting a Memory Card To copy all the files in built-in memory to a memory card Memory Card PrecautionsCopying Files To copy a file from a memory card to built-in memory Photo Loader for Windows/Macintosh Using the Camera with a ComputerInstalling the Software from the CD-ROM About the bundled CD-ROM Windows Computer System RequirementsMacintosh Getting Started Installing Software from the CD-ROM in WindowsSelecting a Language Installing an Application Viewing the Contents of the Read me File On the menu screen, click Exit to exit the menu Installing SoftwareInstalling Software from the CD-ROM on a Macintosh Exiting the Menu Application To install Photo Loader To install Internet Explorer and Outlook ExpressTo install Acrobat Reader To uninstall the USB driver Installing the USB Driver To read the Photo Loader user’s guide To view the camera user’s guide Transferring Files to a Computer Transferring Files Over a USB Connec- tion To connect the USB Cable Turn off the camera and remove its connector cover Terminating a USB Connection Using a Memory Card to Transfer Images to a Computer Memory Data Using a Commercially Available SD Memory Card Reader/WriterDCF Protocol Memory Directory Structure Folder and File ContentsDirectory Structure Image Files Supported by the Camera Built-in Memory and Memory Card Precautions Transferring Audio Files to the Camera Playing AN Audio File EX-M2 Only Preparing the Camera for Audio Player Operation Align the mode selector with AudioPlaying AN Audio File EX-M2 Only LCD Remote Controller Using the Camera as an Audio PlayerGeneral Guide Playing AN Audio File EX-M2 Only Display 100 Basic Remote Controller Operations Audio mode, start audio playback Specifying the Audio Playback ModeSelecting a Specify Track for Playback 101 102 Specifying the Track Playback Sequence 103 Example PLAYLIST.TXT File ContentsExample Folder Structure 104 Disabling Remote Controller Button Operations Audio Playback Precautions LCD Remote Control Error Messages105 106 AppendixMenu Reference Play tab menu Camera Indicator LampsIndicator Lamp Reference 107 108 Audio Mode EX-M2 only 109 USB Cradle Indicator Lamps 110 Troubleshooting Guide 111 112 113 Display Messages Camera Functions Main SpecificationsSpecifications 114 Exposure Control 115 116 Power SupplyAudio Player Function EX-M2 Only USB Cradle LCD Remote Controller Bundled with EX-M2 Only117 Other