To insert a memory card into the camera | Casio EX-S2/EX-M2 specification

USING A MEMORY CARD

Using a Memory Card

To insert a memory card into the camera

1. Making sure that the contacts of the memory card are facing towards the top of the camera, carefully insert the card

into the slot as far as it	Contacts
into the slot as far as it
will go.

To remove a memory card from the camera

1.	Press the memory card
	into the camera and then
	release it. This will cause
	the card to come part way
	out of the camera.
2.	Pull the memory card out
	of the slot.

IMPORTANT!

•Never insert any other object besides a memory card into the camera’s card slot. Doing so creates the risk of damage to the camera and card.

•If you are not using a memory card, be sure to insert the dummy card into this slot to protect against dust and damage.

•The dummy card is intended for use with this camera only. Never insert it into the card slot of any other type of device.

•Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the battery, and contact your dealer or nearest CASIO authorized service center.

•Never remove a card from the camera while the op- eration/flash charge lamp is flashing. Doing so can cause the files save operation to fail, and even dam- age the memory card.

77

Image 77

Casio EX-S2/EX-M2 To insert a memory card into the camera, To remove a memory card from the camera, Using a Memory Card

Contents

EX-S2/EX-M2 Unpacking Introduction Contents Deleting Files Other Settings Transferring Files to a Computer Playing AN Audio File EX-M2 Only Copyright Restrictions Features EX-M2 Only General PrecautionsPrecautions Introduction Operating conditions Data Error Precautions Lens CondensationLED Backlight Other Getting Ready Quick Start Guide To record an image Click the controller to delete the selected image To view a recorded imageTo delete an image Camera Getting ReadyGeneral Guide Front Bottom Removing the Connector CoverUSB Cradle Using the Controller Monitor Screen Contents Play Mode Attaching the Strap Indicator Lamps Power Requirements To load the battery Set the camera onto the USB cradle To charge the batteryTurn off the camera and remove its connector cover Getting Ready If the camera does not work normally Battery Life GuidelinesIf the camera works normally Low Battery Indicator Tip to Make the Battery Last Longer USB Cradle and AC Adaptor Precautions Power Supply PrecautionsBattery Precautions Turning the Camera On and Off Auto Power Off APO Menu Screen Operations Using the On-screen MenusPress Menu Next, do either of the following Configuring Display Language and Clock Settings Getting Ready Recording an Image Basic Image Recording Recording Precautions About the REC Mode Monitor Screen Using Zoom Using the Flash About Red-eye Reduction Flash Precautions Using the Self-timer Specifying Image Size and Quality To specify the image size To specify the image quality Exposure Compensation EV Shift Other Recording Functions REC mode, press Menu Adjusting the White Balance Proce- dure under Adjusting the White Balance, select Manual Adjusting White Balance Manually Click the controller Using the Best Shot Mode Using the Movie Mode Up or down to select Movie, and then Click Rock the controller Recording Audio EX-M2 Only Adding Audio to a Snapshot Press the shutter release button to start audio recording Recording Your Voice Press the shutter release button to start voice recording Audio Recording Precautions Turning Image Review On and Off REC Mode Camera SettingsTurning the Monitor Screen On and Off Assigning Functions to the Controller Specifying Power On Default Settings Basic Playback Operation Playback Playing an Audio Snapshot EX-M2 Only Press Menu to return the image to its original size Zooming the Displayed Image Resizing an Image Playing a Movie Play mode Adding Audio to a Snapshot EX-M2 Only To re-record audio Playing Back a Voice Recording File EX-M2 Only Deleting a Single File Deleting FilesClick the controller to delete the file Press Menu to exit the menu screen Click the controller to delete all the files Deleting All Files Folders File ManagementMemory Folders and Files Protecting Files To protect a single file To protect all files in memory Dpof Settings File Name To insert the date during printing To configure print settings for a single image Click the controller to complete the procedure To configure print settings for all images Exif Print Print Image Matching To copy a file to the Favorite folder Using the Favorite Folder To delete a file from the Favorite folder To display a file in the Favorite folder Specifying an Image for the Startup Screen Other SettingsTurning the Key Tone On and Off Click to register the settings and exit the set- ting screen Changing the Date and Time Setting Changing the Display Language Changing the Date FormatPage Using a Memory Card To remove a memory card from the camera Using a Memory CardTo insert a memory card into the camera Formatting a Memory Card Copying Files Memory Card PrecautionsTo copy all the files in built-in memory to a memory card To copy a file from a memory card to built-in memory Installing the Software from the CD-ROM Using the Camera with a ComputerAbout the bundled CD-ROM Photo Loader for Windows/Macintosh Macintosh Computer System RequirementsWindows Selecting a Language Installing Software from the CD-ROM in WindowsGetting Started Installing an Application Viewing the Contents of the Read me File Installing Software from the CD-ROM on a Macintosh Installing SoftwareExiting the Menu Application On the menu screen, click Exit to exit the menu To install Acrobat Reader To install Internet Explorer and Outlook ExpressTo install Photo Loader To uninstall the USB driver Installing the USB Driver To read the Photo Loader user’s guide To view the camera user’s guide Transferring Files to a Computer Transferring Files Over a USB Connec- tion To connect the USB Cable Turn off the camera and remove its connector cover Terminating a USB Connection Using a Memory Card to Transfer Images to a Computer DCF Protocol Using a Commercially Available SD Memory Card Reader/WriterMemory Data Directory Structure Folder and File ContentsMemory Directory Structure Image Files Supported by the Camera Built-in Memory and Memory Card Precautions Transferring Audio Files to the Camera Playing AN Audio File EX-M2 Only Playing AN Audio File EX-M2 Only Align the mode selector with AudioPreparing the Camera for Audio Player Operation General Guide Using the Camera as an Audio PlayerLCD Remote Controller Playing AN Audio File EX-M2 Only Display 100 Basic Remote Controller Operations Selecting a Specify Track for Playback Specifying the Audio Playback Mode101 Audio mode, start audio playback 102 Specifying the Track Playback Sequence Example Folder Structure Example PLAYLIST.TXT File Contents103 104 Disabling Remote Controller Button Operations 105 LCD Remote Control Error MessagesAudio Playback Precautions Menu Reference Appendix106 Indicator Lamp Reference Camera Indicator Lamps107 Play tab menu 108 Audio Mode EX-M2 only 109 USB Cradle Indicator Lamps 110 Troubleshooting Guide 111 112 113 Display Messages Specifications Main Specifications114 Camera Functions Exposure Control 115 Audio Player Function EX-M2 Only Power Supply116 117 LCD Remote Controller Bundled with EX-M2 OnlyOther USB Cradle