OTHER RECORDING FUNCTIONS

4.Press the shutter release button to start voice recording.

The remaining recording time value counts down on the monitor screen and the operation/flash charge lamp flashes green as recording is performed.

Clicking the controller during voice recording turns off the monitor screen. The monitor screen turns back on automatically when recording is complete.

5.Recording stops when you press the shutter release button, when memory becomes full, or when the battery goes dead.

Audio Recording Precautions

Keep the microphone on the front of the camera pointed

at the subject.

• Take care that you do not block the microphone with your fingers.

Microphone

Good recording results are not possible when the camera is too far from the subject.

Operating camera buttons during recording can cause but- ton noise to be included in the audio.

Pressing the power button or changing the mode selector setting stops recording at that point and stores any audio recorded up to that point.

You can also perform “after-recording” to add audio to a snapshot after recording it, and also change the audio re- corded for an image. See page 59 for more information.

50

Page 50
Image 50
Casio EX-S2/EX-M2 manual Audio Recording Precautions, Press the shutter release button to start voice recording