OTHER SETTINGS
Turning the Key Tone On and Off
Use the following procedure to turn the tone that sounds when you press a key on and off.
1.In the REC mode or PLAY mode, press MENU.
2.Select the “Set Up” tab, select “Beep”, and then rock the controller to the right.
3.Rock the controller up or down to select the setting you want, and then click.
To do this: | Select this: |
|
|
Turn on the key tone | On |
|
|
Turn off the key tone | Off |
|
|
Specifying an Image for the Startup Screen
You can specify an image you recorded with the camera as the startup screen image, which causes it to appear on the monitor screen for about two seconds whenever you turn on the camera.
1.Enter the REC mode or the PLAY mode.
2.Press MENU.
3.Select the “Set Up” tab, select “Startup”, and then rock the controller to the right.
4.Rock the controller left or right to display the image you want to use as the startup image.
5.Rock the controller up or down to select the setting you want, and then click.
To do this:
Use the currently displayed image as the startup screen image
Disable the startup screen
Select this:
On
Off
72
