Uniden 546 owner manual Setting up the Phone, Choose the best location

Page 10

Setting up the Phone

Do the following steps:

A. Choose the best location B. Install the battery pack

C. Connect the base unit D. Choose the dialing mode

A. Choose the best location

Before choosing a location for your new phone, read the “Installation Considerations” included in the “Precaution & Warranty”. Here are some important guidelines you should consider:

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Choose a central location

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave ovens

Avoid excessive moisture, extremely low temperatures,

dust, mechanical vibration, or shock

Avoid personal computers

Avoid other cordless telephones

•The location should be close to both a phone jack and a continuous power outlet which is not switchable.

•Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.

•Be sure there is sufficient space to raise the base antenna to a vertical position.

•The base can be placed on a desk, tabletop, or mounted on a standard wall plate.

[ 6 ] G E T T I N G S TA R T E D

Image 10

Contents Page Page Page Contents Additional Information Controls and Functions 20 21 13 to Line and using the phoneRead This First About the digital security codeChecking the Package Contents Setting up the Phone Choose the best locationBattery PLUG-IN Direction Black RED Cleaning the Battery Charging Contacts Battery use time per chargeLow Battery Alert Do not use any liquids or solventsConnect the base unit Choose the dialing mode If your dialing system isMounting the base unit on a wall Setting the handset retainer clip for wall mountingStandard wall plate mounting Direct wall plate mounting Setting Caller ID Options/Language Entering Your Area Code Making and Receiving Calls Handset On BaseTerminology Earpiece volume Adjusting the Ringer and Earpiece VolumeHandset ringer tone and volume Ringer offRedial from Talk Mode Redialing from Standby Mode From the HandsetRedialing a Call Traveling Out-of-Range Tone Dialing Switch-overSelecting a Different Channel Flash and Call Waiting PagingTo locate the handset Storing Phone Numbers and Names Memory DialingMemory07 Stored Steps for Entering Names and Special Characters If you make a mistake while entering a nameE M O RY D I a L I N G Making Calls with Memory Dialing Memory dialing from Standby ModeDisplay a Programmed Number Memory dialing from Talk Mode Chain DialingEditing a Stored Name and/or Phone Number Memory Store is displayed 9Press to return to standby mode Display a Programmed Number Erasing a Stored Name and Phone Number You must subscribe to Caller ID service to use this feature When the Telephone RingsCaller ID Viewing the Caller ID Message List Deleting Information from the Caller ID List When the pointer is at NoDeleting a Caller ID message When the pointer is at Yes Deleting all Caller ID names/numbersCalling a party from the Caller ID list Using the Caller ID ListLong Distance call and Area Code setting/Cancellation Dial editStoring Caller ID messages in Memory dialing Using Caller ID on Call Waiting Service Call Waiting Features Selecting an OptionChanging the Digital Security Code Headset Installation Beltclip InstallationTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingTroubleshooting Symptom SuggestionAdditional Information General Information Battery InformationAC Adapter Information FCC wants you to know Telephone Line ProblemsTechnical Information RangeMore Than One Cordless Telephone Radio InterferenceCordless Telephone Privacy Precautions Installation Considerations Index J, K, LMemo At Uniden, we’ll take care of you Please do not Return this Product to the Place of PurchaseThank you for purchasing a Uniden Cordless Phone