![](/images/new-backgrounds/1139275/13927527x1.webp)
•After installing the battery pack in the handset, charge your handset at least
5)Connect the telephone line cord to the TEL LINE jack and to a telephone outlet once the handset is fully charged.
If your telephone outlet isn’t |
|
modular, contact your telephone | Modular |
company for assistance. |
D. Choose the dialing mode
Most phone systems use tone dialing which sends DTMF tones through the phone lines. However some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the mode as follows:
If your dialing system is | Set the switch to |
Tone | TONE |
Pulse | PULSE |
•If you are not sure of your dialing system, set for tone dialing. Make a trial call. If the call connects, leave the setting as is, otherwise set for pulse dialing.
•If your phone system requires pulse dialing and you need to send the DTMF tones for certain situations during a call, you may
[ 10 ] G E T T I N G S TA R T E D