![](/images/new-backgrounds/1139275/13927577x1.webp)
Using the Caller ID List
Calling a party from the Caller ID list
You can place a call from the Caller ID list. The TRU546 stores up to 50 messages.
1)Press .
Select the phone number that you
want to dial by pressing or
.
2)Press .
The displayed phone number will be dialed automatically.
Long Distance call and Area Code setting/Cancellation
Pressing while the incoming call information is displayed (in step 1)
will set or cancel a long distance call. Pressing will set or cancel the area code setting.
Dial edit
You can temporarily edit the Caller ID number that is displayed by
pressing . A cursor appears in the display. Press
to move
the cursor left, make your changes and then press . This will not change the number in the Caller ID list memory.
•You cannot make a call from the Caller ID list if your TRU546 is connected to a private branch exchange (PBX).
•When a long distance call has been set,
“1” appears in the display.
•In Caller ID operation, if no key is pressed within 20 seconds, an error tone sounds and the telephone returns to the standby mode.