VTech CS6859-3, CS6859-2, CS6859-4 Battery installation, If you do not hear a dial tone

Page 7

Getting started

Battery installation

Install the battery as shown below.

1.Plug the battery connector securely into the socket, matching the orientation of the engraved label.

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles : (2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES. NE PAS INCINÉRER OU PERCER LES PILES. Made in China / Fabriqué en chine

2.Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment.

THIS SIDE UP / CE CÔTÉ VERS LE HAUT Battery Pack / Bloc-piles :

(2.4V Ni-MH) WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES. NE PAS INCINÉRER OU PERCER LES PILES. Made in China / Fabriqué en chine

3.Slide the battery compartment cover towards the center of the handset until it clicks into place.

4.Place the handset in the telephone base or charger to charge.

CHARGE light remains on when charging.

•If the handset will not be used for a long period of time, disconnect and remove the battery to prevent any possible leakage.

•To purchase replacement batteries, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or

call 1 (800) 267-7377.

IMPORTANT:

Check for a dial tone by pressing . If you hear a dial tone, the installation is successful.

If you do not hear a dial tone:

•Make sure the installation procedures described above are properly done.

•It may be a wiring problem. If you have changed your telephone service to

digital service from a cable company or a VoIP service provider, the telephone line may need to be rewired to allow all existing telephone jacks to work. Contact your cable/VoIP service provider for more information.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Complete user’s manual Product news RegistrationTable of contents Index Answering system settingsAnswering system operation AppendixGetting started Parts checklistTelephone base and charger installation If you do not hear a dial tone Battery installationDisplays Put in charger Battery chargingTabletop to wall mount installation Installation optionsTable to wall mount installation See Telephone base and charger installation on Wall mount to tabletop installationTo use the built-in answering system Are you a new cable or VoIP subscriber?To use the voicemail Delete Telephone base layoutMENU/SELECT Tone Handset layout VolumeMUTE/DELETE To enter the menu Telephone settingsUsing the menu Handset ringer volumeRinger tone Telephone base ringer volumeTo set the duration and turn on the quiet mode Quiet modeTo turn off the quiet mode Set date and time Press Select to choose LCD language LCD languageTo set your voicemail number Voicemail numberClear voicemail To manually turn off these indicatorsHome area code Key tonePress /CID or / to choose Key toneOn or Key toneOff Dial mode Answer a call Telephone operationMake a call Predial a callMute VolumeCall waiting To silence the handset ringer Handset speakerphoneTemporary ringer silencing Temporary tone dialingTo review and dial a redial entry RedialTo delete a redial entry Check voicemail To access a number in the directoryTo access a number in the caller ID log To access a number on the redial listTransfer a call To end paging Find handsetWeb address To start pagingTo share an outside call Multiple handset useJoin a call in progress IntercomSpeaker or INT. Both devices display Intercom ended To initiate an intercom call at the telephone baseTo answer at the telephone base Call transfer using intercomAnswer an incoming call during an intercom call To answer on a cordless handsetIntercom About the directory DirectoryPress Select to choose Add contact Add a directory entryDirectory Alphabetical search Review and dial from the directoryTo start an alphabetical search Delete a directory entry Edit a directory entryAssign a speed dial entry Speed dialDial a speed dial number Reassign a speed dial entryDelete a speed dial entry About caller ID Caller IDInformation about caller ID with call waiting Caller ID log Missed call indicatorReview and dial from the caller ID log Memory matchView dialing options Save a caller ID log entry to the directory To delete all entries Delete the caller ID log entriesCaller ID log screen messages To delete an entryRecord your own announcement Answering system settingsAnswering system AnnouncementDelete your announcement Play the announcementCID or Answer on/offTo turn on or off with the telephone base To turn on or off with a handset or the telephone basePress Select to choose Call screening To turn this feature on or offCall screening Number of ringsMessage alert tone Remote access codePress /CID or / to choose 3 minutes, 2 minutes or Recording timeIf XX new messages displays and /PLAY/STOP on Using the answering system and voicemail togetherAnswering system operation Answering system and voicemailNew message indication Message capacityTo screen a call at a handset Call interceptMessage playback To screen a call at the telephone baseTo play messages with a handset To play messages at the telephone baseOptions during playback To delete all messages with a handset or the telephone base Delete all messagesRecord, play or delete memos To delete all messages with the telephone baseCommand Description Remote accessTo register a handset AppendixExpand your telephone system Add and register a handsetTo deregister all handsets Replace a handsetScreen messages Appendix Handset lights Handset and telephone base indicatorsTelephone base lights Telephone base icons Handset iconsOperation Operating time BatteryCannot dial out TroubleshootingMy telephone does not work at all There is no dial toneMy cordless handset isn’t performing normally Low battery shows on the handset screenCharge light is off Telephone does not ring when there is an incoming call Appendix Telephone does not receive caller ID while on a call Hear other calls when using the telephoneMy caller ID features are not working properly Hear noise on the cordless handset and the keys do not workNew voicemail display and I don’t know why Out of range or no pwr at base shows on the handset screenCannot retrieve voicemail messages Messages on the answering system are very difficult to hear Answering system does not respond to remote commandsOutgoing announcement is not clear Answering system does not record messagesCommon cure for electronic equipment Important safety instructions ECO mode Precautions for users of implanted cardiac pacemakersOperating range Maintenance Energy-saving charging modeRbrc seal About cordless telephonesWhat does this limited warranty cover? Limited warrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsIndustry Canada Technical specificationsIndex Index All rights reserved. Version 1 07/13 91-007177-010-100
Related manuals
Manual 89 pages 13.83 Kb

CS6859-2, CS6859-4, CS6859, CS6859-3 specifications

The VTech CS6859 series of cordless phones, which includes models CS6859-3, CS6859, CS6859-4, and CS6859-2, offers a range of features designed to enhance communication for residential use. Known for their reliability and user-friendly designs, these models combine modern technology with practical functionalities catering to the needs of users.

One of the standout features of the CS6859 series is its cordless design, allowing users to move freely while on calls. This series typically includes multiple handsets, making it excellent for larger homes or office spaces. Depending on the model, some configurations come with three, four, or two handsets, ensuring flexibility and extending coverage throughout the premises.

Each phone is equipped with DECT 6.0 technology. This advanced digital technology enhances the clarity of calls and reduces interference from other wireless devices, ensuring a secure connection. Additionally, DECT 6.0 provides a longer range than earlier technologies, which allows users to stay connected even when moving away from the main base unit.

The CS6859 series features a large, backlit display that makes it easy to see caller ID information, menus, and settings, even in low-light conditions. This is complemented by a straightforward keypad layout, designed for intuitive navigation. Users can store frequently called numbers in the speed dial memory, providing quick access to important contacts.

Another notable characteristic is the series’ built-in answering system. Users can record messages and review them conveniently, allowing for missed calls to be addressed promptly. The voicemail indicator alerts users of new messages, ensuring they never miss an important communication.

Additionally, the CS6859 models incorporate an eco-friendly design, as they are equipped with energy-efficient power supplies that consume less energy during operation. The series is also compatible with headsets, providing hands-free communication for added convenience.

In terms of sound quality, the VTech CS6859 series ensures clear audio with adjustable volume levels to suit user preferences. Features such as call blocking help manage unwanted spam calls, contributing to a more peaceful home environment.

Overall, the VTech CS6859 series exemplifies an ideal balance of functionality and modern technology, making it a preferred choice for anyone seeking reliable cordless phone solutions. With its combination of advanced features, multiple handset options, and user-friendly design, it meets the communication needs of a variety of users, ensuring that connectivity remains seamless.
Top Page Image Contents