NEC NEAX2000IPS manual To Originate a Call Using ONE-TOUCH Buttons

Page 12

TO ORIGINATE A CALL USING ONE-TOUCH BUTTONS

NOTE: With DTP-32D.

◆Press desired Speed Call button, or press

Speaker and Speed Call.

TO PROGRAM

NOTE: Available only on Dterm stations with speed calling keys.

◆Press Feature key, Feature flashes.

	◆ Press desired	SET
	One-Touch button,	SET
	One-Touch button,
	Speaker button	(Time Display)
	LED lights steady.

◆Enter desired station number, feature code or outside access code and telephone number. Display indicates digits dialed.

◆Press Feature again to save the number.

TO VERIFY

◆Press Feature button.

◆Press desired One Touch button.

◆Display indicates digits programmed.

NOTE: When a station number is programmed on a one touch button, the associated LED Light will light when that station is in use. (Available for 32D terminals only.)

10

Image 12

Contents Telephone NEC AMERICA, INC Table of Contents Keys and Lamps TransferAicm Micm On Hook State LCD Terminal Setup with the Feature KEY To change microphone statusTo Originate AN Outside Call VIA Extension Line KEY To Originate AN Internal Call Outside Line AppearanceTo Originate a Call Using ONE-TOUCH Buttons To Originate a Call Using Speed Calling Individual /GROUP Automatic Idle ReturnAuthorization Code Account CodeForced Account Code Voice FIRST/TONE First Originating a Voice CallTo Answer a Voice Call HANDS-FREE Automatic IntercomManual Intercom Dial IntercomDial by Name Using System Speed Dialing Dial by Name Using Station Speed Dialing To Save a Name & Number to Station Speed DialingTo Place a Call on Hold To Place a Call on Exclusive Hold To Place a Call on Remote Hold While in conversation with Station/Trunk PartyTo Transfer a Call ConferenceTo Establish a Broker Call Call Back StationTo Answer a CAMPED-ON Call To SET CAMP-ON Transfer MethodCAMP-ON Call Waiting Method StationCall Park System Call Pickup GroupCall Pickup Direct Outside Line Queuing from Extension Dial ToneTimed Queuing Outside Line only Executive OverrideLast Number Redial CID Call BackCall Forwarding ALL Calls Press Speaker Call Forwarding Busy Call Forwarding no Answer Call Forwarding Destination To Save and Repeat a Number Internal Zone Paging with MEET-MEBOSS/SECRETARY Calling BOSS/SECRETARY Override Do not Disturb OptionTimed Reminder Press TimedPrivacy Release Return Message SchedulePress Speaker. Receive dial tone Dial Return Name Display Quick Reference Guide # #Page Page Feature Recall Conf FPO BAR Code