NEC NEAX2000IPS manual Terminal Setup with the Feature KEY, To change microphone status

Page 9

TERMINAL SETUP WITH THE FEATURE KEY

MICROPHONE ON/OFF

The MIC lamp shows the status of the built-in microphone.

To change microphone status:

Press MIC key.

TO SELECT RINGER TONE

The Dterm Series i has eight kinds of ringer tones that you can select.

Press Feature and 3.

RINGER TONE n

The LCD displays

 

the selected tone

 

number (n=1~8).

 

TONE NO.

FREQUENCY/MODULATION

 

 

1

520+660HZ, 16HZ

 

MODULATING SIGNAL

2

520+660HZ, 8HZ

 

MODULATING SIGNAL

3

1400+1100HZ

 

 

4

1100HZ

 

 

5

540HZ

 

 

6

1100+1400HZ, 16HZ

 

MODULATING SIGNAL

7

660+760HZ, 16HZ

 

MODULATING SIGNAL

8

1100HZ ENVELOP SIGNAL

 

 

TO ADJUST RINGER TONE

NOTE: Access to feature is based on data assignment.

Press Feature and 0.

RINGER TONE n

Ringer activates.

 

 

 

7

Image 9
Contents Telephone NEC AMERICA, INC Table of Contents Transfer Keys and LampsAicm Micm On Hook State LCD To change microphone status Terminal Setup with the Feature KEYTo Originate AN Outside Call VIA Extension Line KEY Outside Line Appearance To Originate AN Internal CallTo Originate a Call Using ONE-TOUCH Buttons Automatic Idle Return To Originate a Call Using Speed Calling Individual /GROUPAuthorization Code Account CodeForced Account Code Originating a Voice Call Voice FIRST/TONE FirstAutomatic Intercom To Answer a Voice Call HANDS-FREEDial Intercom Manual IntercomDial by Name Using System Speed Dialing To Save a Name & Number to Station Speed Dialing Dial by Name Using Station Speed DialingTo Place a Call on Hold To Place a Call on Exclusive Hold While in conversation with Station/Trunk Party To Place a Call on Remote HoldConference To Transfer a CallCall Back Station To Establish a Broker CallTo SET CAMP-ON Transfer Method To Answer a CAMPED-ON CallStation CAMP-ON Call Waiting MethodCall Pickup Group Call Park SystemOutside Line Queuing from Extension Dial Tone Call Pickup DirectExecutive Override Timed Queuing Outside Line onlyCID Call Back Last Number RedialCall Forwarding ALL Calls Press Speaker Call Forwarding Busy Call Forwarding no Answer Call Forwarding Destination Internal Zone Paging with MEET-ME To Save and Repeat a NumberBOSS/SECRETARY Calling BOSS/SECRETARY Override Option Do not DisturbPress Timed Timed ReminderReturn Message Schedule Privacy ReleasePress Speaker. Receive dial tone Dial Return Name Display # # Quick Reference GuidePage Page Feature Recall Conf FPO BAR Code