NAME DISPLAY
NOTE: Display Dterm.
A name with up to 8 characters can be entered to display the name on other Dterm telephones when making a call.
◆Press Speaker. Receive dial tone.
◆Dial the Name Assignment access code and receive special dial tone.
◆Using the keypad, depress the key with the desired letter to display the first letter on the key. The display will indicate the numerical designation. Subsequent depressions will advance through the letters on that key. The following TABLE can be used as a guide to indicate the key and the number of depressions required to display numbers, letters, spaces and periods.
|
|
|
|
| DIAL PAD KEY |
| ||||
|
| 1 2 | 3 | 4 | 5 | 6 | 7 | 8 9 0 * # | ||
1 |
| 1 3 | 3 | 4 | 5 | 6 | 7 | 8 9 0 * # | ||
2 |
| . | A D | G J M P T W | * # | |||||
3 |
| . | B E | H K N Q U X * # | ||||||
4 |
| . | C F I L O R V Y | * # | ||||||
5 |
| . |
|
|
|
|
| S | Z | * # |
◆When the desired letter is displayed, depression of the Transfer key will change the letter to a lower case letter (default is upper case). Depress the Hold key to enter that letter and advance to the next entry.
◆Repeat the previous two steps until the desired name is displayed and entered.
◆Press Speaker.
For example, to enter “Paul”:
7 7 HOLD 2 2 TRF HOLD
8 8 8 TRF HOLD 
5 5 5 5 TRF HOLD 
41