5 Using Your Headset with your Bluetooth® Mobile Phone
Pairing your Headset to your Bluetooth Mobile Phone
1Turn on your mobile phone and enable Bluetooth. For most phones select Settings>Tools>Connections> Bluetooth>On. See your phones user guide for more information.
2Press and hold the power button on the headset until the indicator light flashes red and blue. The headset is now in pairing mode.
Note If you don’t see the red and blue flash, press and hold the power button to turn your headset off. Then press and hold the power button again until you see the red and blue flash.
The headset will stay in pairing mode for three minutes.
3Use the commands on your phone to locate the headset. For most phones select Settings>Tools>Connections> Bluetooth>Search>PROPlantronics. See your phones user guide for more information.
4When prompted for a passkey, enter 0000 (4 zeros). The headset indicator light will flash blue when paired successfully.
note To pair your headset with an additional phone, turn on the phone then repeat steps 2 through 4.
Note For detailed pairing instructions for popular mobile phones visit: www.plantronics.com/easytopair.
Placing, Answering, and Ending Calls with your Headset and Bluetooth Mobile Phone
To place a call | Dial number on your mobile phone keypad. |
|
|
To answer a call | Short press call control button. |
To answer a call when already on an active Microsoft Office Communicator call
Short press the call control button to end the Microsoft Office Communicator call, then press again to answer your mobile phone call.
To end a call | Short press call control button. |
|
|
Redial last number* | Double press call control button. There will be a double low tone on each press. A final tone |
| indicates the last number has been redialed. |
|
|
Activate voice dialing* | Press and hold call control button for two seconds. First tone on key press start followed by |
| a second tone which indicates voice dial is activated. |
|
|
Reject a call | Press call control button for one second until you a single low tone. |
|
|
Missed call | Tap any button to clear the indicator light. The indicator light will triple flash purple every 10 |
| seconds for 5 minutes or until cleared. |
Transfer a call from your mobile phone to your headset
While on a call, press the call control button for one second until you hear a single tone followed by double low tones.
Transfer a call from your headset to your mobile phone
While on a call, press the call control button for one second until you hear a single tone followed by double low tones.
* Only available on mobile phones and carriers that support these features.
Plantronics Voyager PRO UC User Guide | 11 |