If you have an active call on a softphone that supports flash, and wish to place it on hold, press flash. To retrieve it from hold, press flash again.
If you have an active call on a softphone that supports flash, and another call comes in, press the flash button to place your current call on hold and automatically answer the second call.
ωI If you want to end the second call, press the Talk Button (3) in the normal way, this will finish the second call and automatically switch back to the first call. To end this call, press the Talk Button (3) in the normal way.
ωIf you wish to end the first call and continue with the second call, press flash to place the second call on hold and automatically switch to the first call. Press the Talk Button (3) in the normal way, this will finish the first call and automatically switch back to the second call. To end this call, press the Talk Button (3) in the nor mal way.
RECHARGING THE HEADSET
To recharge the headset, place it into the Headset Docking Cradle (10) in the base unit. During charging, the Charge Indicator (13) on the base unit will brighten. When the headset is fully charged, the Charge Indicator (13) on the base unit will extinguish. A completely depleted headset requires a minimum charge time of 1hr before it should be used and 3 hours to fully charge.
6. TRAVELLING WITH YOUR CS50-USB /60-USB HEADSET
If you take your
7.TROUBLESHOOTING PROBLEM
My headset stops responding to button presses.
Possible Cause | Solution |
Headset requires reset | Unplug and |
| and optional power supply. Remove and re- |
| install the battery (see Fig.5 on page 4). |
Headset has a flat battery | Ensure your battery is fully charged. If you |
| are using a laptop that regularly goes into |
13