GE 00019188, 27918, 7907 Message Alert for answering system, Rings to Answer for answering system

Page 32

4. Press the mute/program button to confirm your selection.

NOTE: If both AUDIO PREDIAL and KEY TONE are set to on, AUDIO PREDIAL will take the priority in dialing mode.

Message Alert (for answering system)

This feature sets your answering system to give an alert tone every 10 seconds when there are new messages.

From the Handset Setup Menu:

1.Press the caller ID-volume ( 6 or 5) button to scroll to the MESSAGE ALERT sub-menu.

2.Press mute/program button to enter the menu. NEW MSG ALERT 1ON 2OFF shows in the display.

3.Use the touch-tone pad to enter the selection, or use the caller ID-volume (6 or 5) button to scroll to the 1ON or 2OFF. The default setting is 2OFF.

4.Press the mute/program button to confirm. You will hear a confirmation tone and the new setting shows in the display.

Rings to Answer (for answering system)

This feature lets you select the number of times you want the phone to ring before the answering system answers a call.

From the Handset Setup Menu:

1.Press the caller ID-volume ( 6 or 5) button to scroll to the RING TO ANSWERsub-menu.

32

Image 32

Contents Page Equipment Approval Information Notification to the Local Telephone CompanyPage Interference Information Page Hearing Aid Compatibility HAC LicensingFCC RF Radiation Exposure Statement Information for Dect ProductTable of Contents Changing a Stored VIP Melody Record Security Code for answering systemHandsets Storing CID Records in Internal Memory Belt Clip and Optional Headset Introduction Before You BeginDigital Security System InstallationTelephone Jack Requirements Never install telephone wiring during a lightning storm Important Installation GuidelinesAvoid areas of excessive dust, moisture and low temperature Handset Layout Base Layout PLAY/STOPInstalling the Phone Installing the Handset BatteryBase Station Answering System Setup Voice Time/Day Stamp and Real Time Clock Setting the Voice Prompt LanguageDefault voice prompt language is English Recording the Outgoing Announcement Speaker VolumeVoice Instruction Begin speaking after you hear the beep Reviewing and Choosing the AnnouncementMake sure the answering system is on Make sure your phone is OFF not in talk mode Programming the TelephoneStandby Screen Programming FunctionsPage Language Handset SetupPress caller ID-volume 6 or 5 button to scroll to Handset Name Ringer Volume Ringer ToneVIP Melody You have subscribed to Caller IDStoring VIP Melody Press mute/program button to confirm Changing a Stored VIP Melody RecordReviewing And Deleting Stored VIP Melody Record Key Tone Audio PredialMessage Alert for answering system Rings to Answer for answering systemSecurity Code for answering system Area Code Tone/Pulse RegistrationDe-Registration If you select 1YES, press the mute/program button. HoldPage Default Setting Global De-registrationVisual Indicators Base Telephone OperationSpeakerphone Operation Vmwi / Visual Ringer Indicator on HandsetHandset Making a Call Answering CallsRinger HI/LO/OFF Shortcut Call TimerAuto Standby Flash/Call Waiting Last Number RedialExit Make sure the originating phone is OFF not in talk mode Mute Receiver Volume ControlPaging from the Base/Group Making an Intercom Call Volume BoostIntercom Operation applicable only with additional handsets Receiving an Intercom Call Using Intercom with External Telephone Calls Two-Way CallingThree-Way Calling Transferring External Calls to Other Handsets Caller ID CID Call Waiting Caller IDReceiving CID Records Storing CID Records In CID MemoryAvailable formats include Reviewing CID RecordsDialing a CID Number Storing CID Records in Internal Memory +3-digit area codeDigit area code + 888-8888To Replace a Stored CID Record Deleting a CID RecordStoring a Name and Number in Memory MemoryDeleting All CID Records Press the memory button. The display shows Enter Name Storing the Last Number Dialed Press memory button to display Select Memory 01Press memory button to save Reviewing Records Stored in MemoryChanging Records Stored in Memory Press the memory button to display Memo # Deleting Records Stored in MemoryDialing a Number from Memory Chain Dialing from Memory Number ForMessage Counter Indicator Answering System OperationLeaving a Message/Memo Screening Calls from the Base Message PlaybackYou may erase messages in the following three ways Memory FullErasing Messages Remote Access Cordless HandsetPress the flash/answerer button. The display shows Press the play/stop button to play the messageAccessing the Answering System from Another Location Screening Calls from the HandsetErase message Skip message Turn off/on answererConnecting the Belt Clip Connecting an Optional Headset to the HandsetBelt Clip and Optional Headset Snap the ends of the belt clip into placeChanging the Battery Battery Safety Precautions Display Messages CID service is not working Information in CID memoryPrompt telling you to enter a Memory locationsCharged CallIndicates voice mail has been CID records not reviewedAnswering System Display Messages Handset Sound Signals Troubleshooting GuideTelephone Solutions Low battery warningMake sure the handset ringer software switch is set to on No Display Caller ID SolutionsUnit beeps Caller ID Error Message Answering System SolutionsBattery Solutions Causes of Poor Reception Answering system memory is full. Erase some messagesGeneral Product Care Service Thomson Inc Manager, Consumer Relations Box Indianapolis,Index Index Index Index Index Limited Warranty For how long after your purchaseWhat your warranty does not cover Product Registration If you purchased your product outside the USA Accessory Information Description Model noThomson Inc