GE 7907, 27918, 00019188 manual Caller ID Solutions, Unit beeps, No Display

Page 79

Unit beeps

Clean the charging contacts on the cordless handset and base charge cradle with a soft cloth or an eraser.

See solutions for “No dial tone ” on previous page.

Replace the battery.

Memory dialing doesn’t work

Did you program the memory location keys correctly?

Did you follow proper dialing sequence?

Unit locks up and no communication between the base and cordless handset

Unplug the power adaptor from the electrical outlet and the back of the base. Remove the handset battery. Wait for 30 seconds and plug the power adaptor back into the base and electrical outlet. Reconnect the battery and charge for 16 hours.

Caller ID Solutions

No Display

Charge the battery (for 16 hours). Or replace the battery.

Make sure the unit is connected to a non-switched electrical outlet. Disconnect the power adaptor from the base and reconnect it.

79

Image 79
Contents Page Notification to the Local Telephone Company Equipment Approval InformationPage Interference Information Page Information for Dect Product Hearing Aid Compatibility HACLicensing FCC RF Radiation Exposure StatementTable of Contents Security Code for answering system Changing a Stored VIP Melody RecordHandsets Storing CID Records in Internal Memory Belt Clip and Optional Headset Before You Begin IntroductionTelephone Jack Requirements InstallationDigital Security System Avoid areas of excessive dust, moisture and low temperature Important Installation GuidelinesNever install telephone wiring during a lightning storm Handset Layout PLAY/STOP Base LayoutInstalling the Handset Battery Installing the PhoneBase Station Answering System Setup Default voice prompt language is English Setting the Voice Prompt LanguageVoice Time/Day Stamp and Real Time Clock Voice Instruction Speaker VolumeRecording the Outgoing Announcement Make sure the answering system is on Reviewing and Choosing the AnnouncementBegin speaking after you hear the beep Programming Functions Make sure your phone is OFF not in talk modeProgramming the Telephone Standby ScreenPage Press caller ID-volume 6 or 5 button to scroll to Handset SetupLanguage Handset Name Ringer Tone Ringer VolumeYou have subscribed to Caller ID VIP MelodyStoring VIP Melody Reviewing And Deleting Stored VIP Melody Record Changing a Stored VIP Melody RecordPress mute/program button to confirm Audio Predial Key ToneRings to Answer for answering system Message Alert for answering systemSecurity Code for answering system Area Code Registration Tone/PulseIf you select 1YES, press the mute/program button. Hold De-RegistrationPage Global De-registration Default SettingTelephone Operation Visual Indicators BaseHandset Vmwi / Visual Ringer Indicator on HandsetSpeakerphone Operation Answering Calls Making a CallAuto Standby Call TimerRinger HI/LO/OFF Shortcut Last Number Redial Flash/Call WaitingExit Make sure the originating phone is OFF not in talk mode Paging from the Base/Group Receiver Volume ControlMute Intercom Operation applicable only with additional handsets Volume BoostMaking an Intercom Call Receiving an Intercom Call Two-Way Calling Using Intercom with External Telephone CallsThree-Way Calling Transferring External Calls to Other Handsets Call Waiting Caller ID Caller ID CIDStoring CID Records In CID Memory Receiving CID RecordsDialing a CID Number Reviewing CID RecordsAvailable formats include 888-8888 Storing CID Records in Internal Memory+3-digit area code Digit area code +Deleting a CID Record To Replace a Stored CID RecordDeleting All CID Records MemoryStoring a Name and Number in Memory Press the memory button. The display shows Enter Name Press memory button to display Select Memory 01 Storing the Last Number DialedChanging Records Stored in Memory Reviewing Records Stored in MemoryPress memory button to save Dialing a Number from Memory Deleting Records Stored in MemoryPress the memory button to display Memo # Number For Chain Dialing from MemoryAnswering System Operation Message Counter IndicatorLeaving a Message/Memo Message Playback Screening Calls from the BaseErasing Messages Memory FullYou may erase messages in the following three ways Press the play/stop button to play the message Remote AccessCordless Handset Press the flash/answerer button. The display showsScreening Calls from the Handset Accessing the Answering System from Another LocationSkip message Turn off/on answerer Erase messageSnap the ends of the belt clip into place Connecting the Belt ClipConnecting an Optional Headset to the Handset Belt Clip and Optional HeadsetChanging the Battery Battery Safety Precautions Display Messages Memory locations CID service is not workingInformation in CID memory Prompt telling you to enter aCID records not reviewed ChargedCall Indicates voice mail has beenAnswering System Display Messages Low battery warning Handset Sound SignalsTroubleshooting Guide Telephone SolutionsMake sure the handset ringer software switch is set to on Unit beeps Caller ID SolutionsNo Display Battery Solutions Answering System SolutionsCaller ID Error Message Answering system memory is full. Erase some messages Causes of Poor ReceptionGeneral Product Care Thomson Inc Manager, Consumer Relations Box Indianapolis, ServiceIndex Index Index Index Index For how long after your purchase Limited WarrantyWhat your warranty does not cover Product Registration If you purchased your product outside the USA Description Model no Accessory InformationThomson Inc