GE 7907, 27918, 00019188 manual Answering System Display Messages

Page 76

REPT	Indicates a repeat call message.
	Indicates a new call from the same
	number was received more than
	once.
SEARCHING	Indicates handset is searching for
	the base.
SPKR	Indicates the handset is in
	speakerphone mode.
UNKNOWN CALLER/	Indicates incoming call is from an
NAME/NUMBER	area not serviced by CID or
	the CID information was not sent.

Answering System Display Messages

The following messages show the status of the answering system or help you set up and use the system.

0-59	Indicates the total number of
	messages.

CL (blinking)

- -

An (blinking)

F (blinking)

Six bars (blinking)

LA (Line Access)

76

The voice time/day stamp needs to be set.

Answering system is turned off. The system is answering a call. Answering system memory is full.

The system is recording a memo or an announcement.

External line remote answering system.

Image 76

Contents Page Equipment Approval Information Notification to the Local Telephone CompanyPage Interference Information Page Hearing Aid Compatibility HAC LicensingFCC RF Radiation Exposure Statement Information for Dect ProductTable of Contents Changing a Stored VIP Melody Record Security Code for answering systemHandsets Storing CID Records in Internal Memory Belt Clip and Optional Headset Introduction Before You BeginTelephone Jack Requirements InstallationDigital Security System Avoid areas of excessive dust, moisture and low temperature Important Installation GuidelinesNever install telephone wiring during a lightning storm Handset Layout Base Layout PLAY/STOPInstalling the Phone Installing the Handset BatteryBase Station Answering System Setup Default voice prompt language is English Setting the Voice Prompt LanguageVoice Time/Day Stamp and Real Time Clock Voice Instruction Speaker VolumeRecording the Outgoing Announcement Make sure the answering system is on Reviewing and Choosing the AnnouncementBegin speaking after you hear the beep Make sure your phone is OFF not in talk mode Programming the TelephoneStandby Screen Programming FunctionsPage Press caller ID-volume 6 or 5 button to scroll to Handset SetupLanguage Handset Name Ringer Volume Ringer ToneVIP Melody You have subscribed to Caller IDStoring VIP Melody Reviewing And Deleting Stored VIP Melody Record Changing a Stored VIP Melody RecordPress mute/program button to confirm Key Tone Audio PredialMessage Alert for answering system Rings to Answer for answering systemSecurity Code for answering system Area Code Tone/Pulse RegistrationDe-Registration If you select 1YES, press the mute/program button. HoldPage Default Setting Global De-registrationVisual Indicators Base Telephone OperationHandset Vmwi / Visual Ringer Indicator on HandsetSpeakerphone Operation Making a Call Answering CallsAuto Standby Call TimerRinger HI/LO/OFF Shortcut Flash/Call Waiting Last Number RedialExit Make sure the originating phone is OFF not in talk mode Paging from the Base/Group Receiver Volume ControlMute Intercom Operation applicable only with additional handsets Volume BoostMaking an Intercom Call Receiving an Intercom Call Using Intercom with External Telephone Calls Two-Way CallingThree-Way Calling Transferring External Calls to Other Handsets Caller ID CID Call Waiting Caller IDReceiving CID Records Storing CID Records In CID MemoryDialing a CID Number Reviewing CID RecordsAvailable formats include Storing CID Records in Internal Memory +3-digit area codeDigit area code + 888-8888To Replace a Stored CID Record Deleting a CID RecordDeleting All CID Records MemoryStoring a Name and Number in Memory Press the memory button. The display shows Enter Name Storing the Last Number Dialed Press memory button to display Select Memory 01Changing Records Stored in Memory Reviewing Records Stored in MemoryPress memory button to save Dialing a Number from Memory Deleting Records Stored in MemoryPress the memory button to display Memo # Chain Dialing from Memory Number ForMessage Counter Indicator Answering System OperationLeaving a Message/Memo Screening Calls from the Base Message PlaybackErasing Messages Memory FullYou may erase messages in the following three ways Remote Access Cordless HandsetPress the flash/answerer button. The display shows Press the play/stop button to play the messageAccessing the Answering System from Another Location Screening Calls from the HandsetErase message Skip message Turn off/on answererConnecting the Belt Clip Connecting an Optional Headset to the HandsetBelt Clip and Optional Headset Snap the ends of the belt clip into placeChanging the Battery Battery Safety Precautions Display Messages CID service is not working Information in CID memoryPrompt telling you to enter a Memory locationsCharged CallIndicates voice mail has been CID records not reviewedAnswering System Display Messages Handset Sound Signals Troubleshooting GuideTelephone Solutions Low battery warningMake sure the handset ringer software switch is set to on Unit beeps Caller ID SolutionsNo Display Battery Solutions Answering System SolutionsCaller ID Error Message Causes of Poor Reception Answering system memory is full. Erase some messagesGeneral Product Care Service Thomson Inc Manager, Consumer Relations Box Indianapolis,Index Index Index Index Index Limited Warranty For how long after your purchaseWhat your warranty does not cover Product Registration If you purchased your product outside the USA Accessory Information Description Model noThomson Inc