5312 and 5324 IP Phone SIP User and Administrator Guide
- 22 -
•
To talk to this party, wait until the connection is established, speak to the party,
press
(
TRANS/CONF
) or press the
TRANSFR
softkey (5324 only), and then
hang up. This is an Attended Call Transfer.
•
To transfer the call without speaking to this party, immediately press
(
TRANS/CONF
) or press the
TRANSFR
softkey (5324 only), and then hang up.
The held call will be transferred to the call in progress. This is an Unattended Call
Transfer.
•
To cancel the transfer, press
(
CANCEL
). You are returned to the held call.
Transfer a Call to a Third Party Already on Hold
1. While on a call, press
(
TRANS/CONF
). The call is put on hold.
2. Press
the
Line
key of the call on hold, and then press
(
TRANS/CONF
).
3. Hang
up.
Conference Call (Three-Way)
When two parties are connected on a call, either of those parties can originate a three-way
conference by adding a third party to the call in progress. Once three parties are connected,
no more parties can be added to that call.
A party can be involved in more than one three-way conference call at a time, but the calls
cannot be merged. For example, A and B are on a call. A adds C to create three-way
conference call ABC. B adds D to the call with A to make conference call ABD. ABC and ABD
remain separate– D is not added to conference call ABC.
Note:
During a conference call, any party can perform a call transfer as long as there is one
free line on that phone. For call transfer information, see
Call Transfer
on page 21.
Add a Third Party to a Call in Progress
1. Press
(
TRANS/CONF
). The current call is put on hold.
2. Press a free
Line
key, and then do one of the following:
•
Dial the number.
•
Press
a
Speed Dial
key.
•
Press
(
REDIAL
).
3. Press
DIAL
.
4. Press
the
CONF
softkey (or the
#
to select
CONF
on the 5312). The call you put on hold
in step 1 is connected to the call in progress.
Note:
If the new party does not answer, press
(
CANCEL
) twice to return to the held
party.
Add a Party On Hold to a Call in Progress
1. Press
(
TRANS/CONF
). The current call is put on hold.
2. Press
the
Line
key of the party already on hold.