Call Handling
- 23 -
3. Press
(
TRANS/CONF
). The call put on hold in step 1 is connected to the call in
progress.
Leave a Conference Call
Do one of the following:
•
Hang
up.
•
Press
HANGUP
softkey (5324 IP Phone only).
•
Press (
CANCEL
).
Note:
Any of the three parties can hang up and the other two parties will remain connected.
Messages - Advisory
An advisory message about your whereabouts appears on your caller's display.
Create an Advisory Message
•
Access
the
Feature Configuration
page of the Web Configuration Tool (see
Accessing
the Web Configuration Tool
on page 7).
Enable/Disable your Advisory Message
To enable or disable an advisory message:
1. Press (
SUPERKEY
), and then press
>>
until FEATURES? appears.
2. Press
OK
, and then press
▼
until ADVISORY MESSAGES? appears.
3. Press
OK
. The first of several advisory messages appears.
4. Press
(
UP
) or
(
DOWN
) to navigate to the desired message.
5. Press
TURNON
or
TURNOFF
to enable or disable the message. When turned on, the
Advisory Message
key is lit and the chosen advisory message will be displayed in the
LCD.
6. Do one of the following:
•
To return to the main menu, press
EXIT
.
•
To return to the default display, press
(
SUPERKEY
). The advisory message
alternates with the date and time on the default display.
Note:
To enable/disable advisory messages using the Web Configuration Tool, access the
tool’s
Feature Configuration
page (see page 7).
Messaging – Voice Mail
Your Administrator configures your voice mail information so you can receive and access
voice mail messages. The Ring/Message Indicator flashes to indicate waiting messages.
Note:
For administrative information on voice mail, see
Error! Reference source not
found.
on page
Error! Bookmark not defined.
.