Using Advanced Features
- 31 -
If an SNTP server is not available in your system setup, you can modify the time and date
using your phone or the
Date/Time
page of the Web Configuration Tool (see
Accessing the
Web Configuration Tool
on page 7). For more information, contact your Administrator.
Note:
You cannot change your time and date settings while on a call.
Note:
If your phone loses power, the modified time and date are not saved.
Change the Time and Date
Important:
Use this procedure only if an SNTP server is not provided. If an SNTP server is
not available, you must reprogram these settings every time the phone reboots.
1. Press (
SUPERKEY
), and then press
>>
until FEATURES? appears.
2. Press
OK
, and then press
▼
until TIME AND DATE? appears.
3. Press
OK
. SET TIME? appears.
4. Do one of the following:
•
To change the time, press
YES
. 12 OR 24 HR FORMAT? appears. Proceed to
step 5.
•
To change the date, press
NO
. SET DATE? appears. Proceed to step 9.
5. Do one of the following:
•
To enter the time in a.m./p.m. format, press
12
.
•
To enter the time using the 24-hour clock, press
24
.
6. Enter the time (for example, 1236 for 12:36; 0220 for 02:20), and then press
SUBMIT
.
7. (For a.m./p.m. only) Press
AM
or
PM
. SET TIME? appears with the new time.
8. Press
NO
. SET DATE? appears.
9. Do one of the following:
•
To change the date, press
YES
, and then proceed to step 10.
•
To return to the main menu, press
NO
, and then proceed to step 11.
10. Enter the date (for example, enter 161204 for 16 December 2004), and then press
SUBMIT
. SET DATE? appears with the new date.
11. Do one of the following:
•
To return to the main menu, press
NO
.
•
To return to the default display, press
(
SUPERKEY
).