Mitel 5312 Automating Firmware Upgrades , Configuring Voice Mail

Page 42

5312 and 5324 IP Phone SIP User and Administrator Guide 

- 36 - 

To upgrade the phone’s firmware through the Superkey Menu Interface: 

1. Press   (

SUPERKEY

), and then press 

>>

 until FEATURES? appears. 

2. Press 

OK

, and then press 

▼

 until UPGRADE FIRMWARE? appears. 

3. Press 

OK

. CHOOSE PROTOCOL appears. 

4.  Press the desired protocol (

HTTP

 or 

TFTP

), or press 

AUTO

. BEGIN UPGRADE NOW? 

appears. 

5. Press 

CONFIRM

. The downloading process begins and the phone reboots. This 

process may take approximately 1 to 2 minutes. When the time and date appear on the 

display, the download and reboot is complete and the phone is ready for use.  

CAUTION: DO NOT

 

remove power from the phone while phone is upgrading its 

memory with the new firmware. This may result in severe damage to your phone. 

Troubleshooting Tip

: If your phone displays "SIP MAIN NOT FOUND", it is likely that 

your system has experienced a power failure. The SIP Phone Boot firmware "borrows" Flash 

sectors from the SIP Main area during firmware installation. At the end of a normal 

installation, the sectors are restored without affecting SIP Main. However, if power is 

removed during Boot installation, then SIP Main is erased and will have to be reinstalled on 

the phone. 

Automating Firmware Upgrades 

You can configure phones to poll the server for new versions of firmware. When the phone 

detects a firmware upgrade, it downloads the new version and stores it in memory. When it is 

next idle, the phone reboots with the new firmware. 

To automate firmware upgrades, your Administrator can set a Firmware Upgrade option and 

a polling interval on the Firmware Update page of the Web Configuration Tool. For 

programming options, refer to the online help supplied with the Web Configuration Tool. 

To upgrade firmware on multiple phones, refer to the 

Mass Deployment

 topic in the 

Administrators Tools section of the Web Configuration Tool Online Help. 

Configuring Voice Mail 

Voice mail for SIP-supported phones is server-based. For more information on the voice mail 

system, contact the SIP Service Provider.  

To configure voice mail on the 5312 IP Phone and 5324 IP Phone: 

•

 Access 

the 

Administrator Tools > Configuring SIP Features

 section in the Administrator’s 

Web Configuration Tool online help. 

To configure voice mail on a 5324 IP Phone only: 

1. Press   (

SUPERKEY

), and then press 

>>

 until ADMIN TOOLS? appears. 

2. Press 

OK

, and then press 

▼

 until NETWORK SETTINGS? appears. 

3. Press 

OK

, enter your administrator password, and then press 

SUBMIT

. 

4. Press 

NEXT

 until VOICE MAIL SERVER appears, and then press 

REVIEW

.  

Image 42
Related manuals
Manual 58 pages 32.03 Kb en