GE 25898A, 55898580 manual Telephone Operation

FACTORY DEFAULT

As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings.

1.Press the flash/prog button until DEFAULT shows in the display. The default is NO.

2.Use the CID-VOL (- or +) buttons to select YES or NO.

3.Press the flash/prog button again. You will hear a confirmation tone.

NOTE : The default settings are ENGLISH, AREA CODE - - -, and RINGER TONE 1.

NOTE : Press the *exit button once to keep the previous setting and return to the standby screen.

TELEPHONE OPERATION

MAKING A CALL

1.Pick up the handset, and press the talk/callback button.

2.When you hear a dial tone, dial a telephone number.

3.When finished, press the talk/callback button again to hang up.

OR

1.Dial the phone number first, then press the talk/callback button.

2.When finished, press the talk/callback button again to hang up.

NOTE: If you make a mistake press the del/chan button to backspace and erase the wrong number(s).

ANSWERING A CALL

1. Pick up the handset, and press the talk/callback button.

NOTE: The talk/callback button is disabled when the handset is in the cradle.

2.When finished, place the handset back in the cradle, or press the talk/ callback button again.

IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless in the event of a power failure.

16