•The handset may be out of range of the base. Move closer to the base.
•Make sure the battery is properly charged (12 hours).
•Make sure the battery pack (in the handset) is properly installed.
•The handset should beep when you press the talk/callback button, and the charge/in use indicator on the base should be lit when the handset rests in the cradle. If not, the battery may need to be charged.
•Place the handset in the base for at least 20 seconds to reset the unit. Handset does not ring
•Make sure the RINGER switch on the handset is turned to ON.
•The handset may be out of range of the base. Move closer to the base.
•You may have too many extension phones on your line. Try unplugging some phones.
•Check for dial tone.
You experience static, noise, or fading in and out
•Change channels.
•The handset may be out of range of the base. Move closer to the base.
•Relocate the base. Make sure the base is not plugged into an outlet with another household appliance.
•Charge the battery.
Unit beeps
•Place handset in base for 20 seconds; if it still beeps, charge battery for 12 hours.
•Clean charging contacts on handset and base with a soft cloth or an eraser.
•See solutions for “No dial tone.”
•Replace battery.
Memory Dialing doesn't work
•Did you program the memory location keys correctly?
•Did you follow proper dialing sequence?
31