GE 25898A, 55898580 manual Changing a Stored Number

3.Press the memory button again.The display shows ENTER NAME.

4.Use the handset touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L, then press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letterT; press the 4 key twice for the letter H.

NOTE: If you make a mistake press the chan/delete button to backspace and erase the wrong character(s) or number(s).

5.Press the memory button again to save your selection. The display shows ENTER TEL NUMBR.

6.Use the handset touch-tone pad to enter the area code followed by the telephone number (up to 24 digits, including pauses) and press the memory button again to save your selection. The unit beeps to confirm.

7.To enter another name and number in a different memory location, return to step 1 and repeat the process.

CHANGING A STORED NUMBER

Use the Storing A Number In Memory procedure to change a stored number and replace the old phone number with a new phone number.

When REPLACE MEMO? shows in the display, you must press the memory button on the handset to confirm replacement.

DIALING A STORED NUMBER

1.Make sure the phone is ON by pressing the talk/callback button on the handset.

2.Press the memory button on the handset.

3.Press the number key (0-9) for the desired memory location. The stored phone number dials automatically.

OR

1. Make sure the phone is OFF (not in TALK mode).

22