GN Netcom GN7170 manual Features and Customization

Page 7

2.Gently snap on the headband around the headset receiver.

3.Insert the headset’s plug into the cordless phone headset jack.

4.Place the headset into the headset stand, or place the headband on your head so that it rests comfortably on your head and that the ear cushion rests on your ear.

Note: The microphone on the boom arm should be pointed in the direction of your mouth.

3.Features and Customization

There are 5 programmable menus available: language, area code, ringer tone, tone/pulse dialing, and default setting selection. We suggest you customize your GN 7170 in this order:

3.1 Language setting selection

1.Press the FLASH/PROGRAM button until 1ENG 2FRA 3ESP shows in the display. 1ENG is the default position.

2.Use the or button (or the number keypad) to scroll to your selection.

3.Press the FLASH/PROGRAM button to store the selection.

3.2 Area code selection

To select the area code, complete the following:

1.Press the FLASH/PROGRAM button until AREA CODE shows in the display.

• --- is the default setting.

2.Use the number keypad to enter your 3-digit area code.

Note: If you make a mistake, press the CH/DELETE button to erase the wrong area code. Repeat step 2.

3.Press the FLASH/PROGRAM button to store the selection.

3.3 Ringer tone selection

To select the ringer tone, complete the following:

1.Press the FLASH/PROGRAM button until RINGER/TONE shows in the display.

1 is the default position.

2.Use the or button (or the number keypad) to move the display’s arrow indicator to 1, 2 or 3.

3.Press the FLASH/PROGRAM button to store the selection.

Tone/pulse dialing selection

Note: The GN 7170 automatically defaults to touch-tone dialing. If you don’t know which type of service you have, contact your corporate telephone network administrator and/or your local telephone service provider.

To select tone/pulse dialing, complete the following:

1.Press the FLASH/PROGRAM button until 1TONE 2 PULSE shows in the display.

• 1TONE is the default position (touch-tone dialing).

2.Use the or button (or the number keypad) to move the display’s arrow indicator to 1TONE or 2 PULSE.

3.Press the FLASH/PROGRAM button to store the selection.

3.4 Default setting selection

If required, you may return your GN 7170 to its factory-set default settings by completing the following:

1.Press the FLASH/PROGRAM button until DEFAULT shows in the display.

• 1 NO is the default setting.

7

GN7170_userguide.ind 7

13/08/04 9:55:52

Page 6 Page 8
Image 7
Page 6 Page 8
Contents FIN English GN 7170 user guide ContentsTransferring CID records to memory Display messages and sound signalsMemory function Parts and signatures Product information GNTelephone jack requirements Setting upInstallation prerequisites Installation guidelinesAssembling and connecting the headset stand and headset Connecting batteryConnecting AC/DC electrical power Connecting the telephone line and switching the unit onFeatures and Customization Telephone operation Redial CHARGE/IN USE indicatorCanceling instruction *TONE/CANCEL button Ringer SwitchCall Waiting Caller ID Caller ID CID featuresVolume Call TimerDeleting the current CID record Transferring CID records to memoryReviewing CID Records Transferring a CID record to your GN 7170’s memoryStoring a name and number in memory Memory functionDialing a Caller ID number Changing the CID number formatReviewing and deleting numbers Storing a redial numberDialing a stored number Inserting a pause in the dialing sequenceNumber for Memory location 0 through Chain dialing from the memorySound signals table Meaning Display messages and sound signalsDisplay messages table Meaning ’m experiencing static/interference during my phone calls Frequently asked questions’ve connected my phone, but there is no dial tone Dial tone is OK, but I still can’t dial outOperational and safety information GN7170userguide.ind 13/08/04
Top Page Image Contents