2.Use the 
or 
button (or the number keypad) to move the display’s arrow indicator to 1 NO or 2 YES.
3.Press the FLASH/PROGRAM button to store the selection.
• You will hear a confirmation tone.
3.5 Activating custom calling features: FLASH/PROGRAM button
Pressing the FLASH/PROGRAM button will activate custom calling features such as call waiting or call transfer. Such features are provided by your telephone operator.
Note: When accessing custom calling features, do not press the TALK/CALL BACK button as this will hang up the call.
3.6 Wearing styles: headband or earwap
You may choose between a headband or earwrap wearing style for your headset.
To attach an earhook:
1.Gently push on the foam side of the headset receiver with your thumb to push out the headset receiver from the headband ring.
2.Insert the thin end of the flexible earhook into one of the earhook
clutches. There are 2 clutches, allowing you to wear the headset on either ear.
To attach a headband:
3.Pull out the earwap from the retaining clutch.
4.Gently snap the headband around the headset receiver.
4. Telephone operation
4.1 Making/answering and ending calls
Before making/answering calls, note the following:
•The cordless phone must be out of its base unit to make/answer. You can still receive calls with the cordless phone in its base.
•Placing the cordless phone into the base during a call will hang up the call.
•Keep the headset plugged into the cordless phone.
To make calls:
1.Remove the cordless phone from the base unit (if not out).
2.Press the TALK/CALL BACK button on the cordless phone.
3.Dial the desired number.
Note: You may also dial the desired number, followed by pressing the TALK/CALL BACK button on the headset.
To answer calls:
1.Remove the cordless phone from the base unit (if not out).
2.Press the TALK/CALL BACK button on the headset, and take the call.
To end calls, simply press the TALK/CALL BACK button or place the cordless phone into the base unit for charging.
8
GN7170_userguide.ind 8
13/08/04 9:55:55