5830_CIB_1ATT 8/14/02 9:47 PM Page 55
PHONE
PROBLEM
If the phone does not ring when you receive
a call:
SOLUTION
•Make sure the ringer is on (see “Ringer Volume” on pages 11 and 19).
•Make sure the telephone line cord is connected firmly to the base and the telephone jack.
•Make sure the AC adapter is plugged firmly into an electrical outlet not controlled by a wall switch.
•You might be too far from the base; move closer.
•You might have too many extension phones on your telephone line to allow all of them to ring. Try unplugging some of them.
DIFFICULTY
PROBLEM | SOLUTION |
If your telephone | • If you have dial pulse (rotary) service, |
misdials: | you’ll need to set the dial method to |
| PULSE. Follow the instructions under |
| “Dial Mode (TONE/PULSE)” in the |
| FEATURE SETUP – BASE section of this |
| manual. |
| • If you have touch tone service and you |
| hear clicks while you are dialing, you’ll |
| need to set the dial method to PULSE. |
| Follow the instructions under “Dial Mode |
| (TONE/PULSE)” in the FEATURE SETUP – |
| BASE section of this manual. |
|
|
PROBLEM | SOLUTION |
If you are unable to | If you have dial pulse (rotary) service, |
operate special | follow the directions under “Temporary |
telephone services or | Tone Dialing” in the TELEPHONE |
other equipment | OPERATION section of this manual. |
requiring touch tone |
|
signals: |
|
|
|
IN CASE OF
55