5830_CIB_1ATT 8/14/02 9:47 PM Page 4
3Install the handset battery.
Use only AT&T Battery 2401, SKU# 91077.
INSTALLATION
a)Remove battery compartment cover by pressing on the raised spot and sliding downward.
b)Align the contacts and place the battery pack in the battery compartment.
c)Replace cover by sliding it on its track up over battery case until it snaps firmly into place.
4Charge the handset battery.
•Place the handset in the base.
•Charge the battery at least 12 hours. After the first charge, the battery will charge in eight hours.
5Check for dial tone.
•After the batteries are charged, lift the handset and press P; you should hear a dial tone.
4