January 2007
Profile Name
Profile Name: Enter a Profile Name.
During the
Notes/Domino Authentication
When you start the
Servername: where authentication database resides. If the database is local, then leave it empty! Databasename: Enter the Notes database that is used for authentication.
PBX Authentication
Registrar: TCP/IP Number or DNS name of your registrar
Realm: Some PBX/Registrar needs a Realm for MD5 authentication
Number of Digits: During client startup, the office phone number is used for the SIP Registrar registration. This amount of digits will be used for reregistration (starting from the “right” side)
e.g. If the office phone number is 123 456 7890 and the Number of digits is 4, the registration will be 7890
Internal Phone Ranges: Enter the internal phone number ranges (this is used for signaling/ringing) and outbound number resolving in case you enter a ITU standards based phone number
(e.g. +1 798 913 3455)
Password: Password for proxy/PBX authentication
Domain: Enter the Domain name (e.g. iscoord.net). This is used to build the identity of the user. If you leave this field empty, then the identity will be phonenumber@registrar.
Reregister in seconds: Reregistration happens in the defined interval – if empty or 0 – no reregistration will be done with the registrar after the 1st successful registration (some PBX require this)
© All rights reserved. Subject to change without notice. | Page 9 / 15 |
| |
phone +41 1 258 88 82, fax +41 258 88 99, |
|