TANDBERG D14049.01 manual Field, Authentication Mode On, Setup

CPLText Referencgoeshere

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

Overview

Field

Within the address-switch node, the mandatory field parameter specifies which address is to be considered. The supported attributes and their interpretation are as follows:

Field

origin

Authentication Mode: On

SIP

The “From” and “ReplyTo” fields of the message if it authenticated correctly, otherwise not-present.

	Authentication Mode: Off
H.323	SIP	H.323
The source aliases from the original	The “From” and “ReplyTo” fields of the	The source aliases from the original
LRQ or ARQ that started the call if it	incoming message.	LRQ or ARQ that started the call. If a
authenticated correctly otherwise not-		SETUP is received without a preceding
present. Since SETUP messages are		RAS message then the origin is taken
not authenticated if we receive a setup		from the SETUP.
without a preceding RAS message the
origin will always be not-present.

unauthenticated-origin

authenticated-origin

The “From” and “ReplyTo” fields of the incoming message.

The “From” and “ReplyTo” fields of the message if it authenticated correctly, otherwise not-present.

The source aliases from the original LRQ or ARQ that started the call. If a SETUP is received without a preceding RAS message then the origin is taken from the

SETUP.

The source aliases from the original LRQ or ARQ that started the call if it authenticated correctly otherwise empty. Since SETUP messages are not authenticated if we receive a setup without a preceding RAS message the origin will always be not-present.

The “From” and “ReplyTo” fields of the incoming message.

not-present

The source aliases from the original LRQ or ARQ that started the call. If a SETUP is received without a preceding RAS message then the origin is taken from the SETUP.

originating-zone

originating-user registered-origin destination original-destination

The name of the zone or subzone for the originating leg of the call. If the call originates from a Neighbor, Traversal Server or Traversal Client zone then this will equate to the zone name. If it comes from an endpoint within one of the local subzones this will be the name of the subzone. If the call originates from any other locally registered endpoint this will be “DefaultSubZone”. In all other cases this will be “DefaultZone”.

The username used for authentication. not-present

If the call originates from a registered endpoint this is the list of all aliases it has registered, otherwise not-present.

The destination aliases.

The destination aliases.

If the selected field contains multiple aliases then the VCS will attempt to match each address node with all of the aliases before proceeding to the next address node i.e. an address node matches if it matches any alias.

Introduction	Getting	System	System	H.323 & SIP	Registration	Zones and	Call	Firewall	Bandwidth	Maintenance	Appendices
	Started	Overview	Configuration	Configuration	Control	Neighbors	Processing	Traversal	Control
D 14049.01					171
07.2007