CommandText goes hereReference - xConfiguration

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

Zones

Zone [1..200]

TraversalClient

SIP

Port: <1024..65534>

 

 

cont...

cont...

cont...

 

Specifies the port on the traversal server to be used for SIP calls from this VCS.

 

 

 

 

Transport: <TCP/TLS>

 

 

 

 

 

 

Determines which transport type will be used for SIP calls to and from the traversal server.

 

 

 

 

TCP: TCP will be used.

 

 

 

 

 

 

TLS: TLS will be used.

 

 

 

 

TraversalServer

Authentication

UserName: <S: 1, 128>

 

 

 

 

 

 

If the traversal client is a VCS, this must be the VCS’s Authentication User Name. If the traversal client is a

 

 

 

 

gatekeeper, this must be the gatekeeper’s System Name.

 

 

 

 

H323

H46019

Demultiplexing

Mode: <On/Off>

 

 

 

 

 

 

Determines whether the VCS will operate in Demulti-

 

 

 

 

 

 

plexing mode for calls from the traversal client.

 

 

 

 

 

 

On: allows use of the same two ports for all calls.

 

 

 

 

 

 

Off: Each call will use a separate pair of ports for

 

 

 

 

 

 

media.

 

 

 

 

Port: <1024..65534>

 

 

 

 

 

 

Specifies the port on the VCS being used for H.323 firewall traversal from this traversal client.

 

 

 

 

Protocol: <Assent/H46018>

 

 

 

 

 

 

Determines the protocol to be used for calls from the traversal client.

 

 

 

 

Assent: the Assent protocol will be used.

 

 

 

 

 

H46018: the H.460.18 protocol will be used.

 

 

 

 

SIP

Port: <1024..65534>

 

 

 

 

 

 

Specifies the port on the VCS being used for SIP firewall traversal from this traversal client.

Transport: <TCP/TLS>

Determines which of the two transport types will be used for SIP calls between the traversal client and VCS.

TCP: TCP will be used.

TLS: TLS will be used.

Introduction

Getting

System

System

H.323 & SIP

Registration

Zones and

Call

Firewall

Bandwidth

Maintenance

Appendices

Started

Overview

Configuration

Configuration

Control

Neighbors

Processing

Traversal

Control

 

 

 

D 14049.01

 

 

 

 

147

 

 

 

 

 

07.2007

 

 

 

 

 

 

 

 

 

Page 147
Image 147
TANDBERG D14049.01 manual Zones TraversalClient, Plexing mode for calls from the traversal client