CommandText goes hereReference - xConfiguration

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

H323

Gatekeeper

CallSignaling

TCP

Port: <1024..65534>

cont...

cont...

cont...

 

Specifies the port that listens for H.323 call signaling.

 

 

CallTimeToLive: <60..65534>

 

 

 

Specifies the interval (in seconds) at which the VCS polls the endpoints in a call to verify that they are still in the call.

 

 

Registration

ConflictMode: <Reject/Overwrite>

 

 

 

Determines how the system will behave if an endpoint attempts to register an alias currently registered from another IP address.

 

 

 

Reject: denies the registration.

 

 

 

Overwrite: deletes the original registration and replaces it with the new registration.

UDP Port: <1024..65534>

Specifies the port to be used for H.323 UDP registrations.

TimeToLive: <60..65534>

Specifies the interval (in seconds) at which an H.323 endpoint must re-register with the VCS in order to confirm that it is still functioning.

Mode: <On/Off>

Determines whether or not the VCS will provide H.323 gatekeeper functionality.

On: the VCS will act as an H.323 gatekeeper.

Off: the VCS will not act as an H.323 gatekeeper.

 

Interworking

 

Mode: <On/Off/RegisteredOnly>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Determines whether or not the VCS will act as a gateway between SIP and H.323 calls.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Off: the VCS will not act as a SIP-H.323 gateway.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RegisteredOnly: the VCS will act as a SIP-H.323 gateway but only if at least one of the endpoints is locally registered.

 

 

 

 

 

 

 

 

 

 

 

On: the VCS will act as SIP-H.323 gateway regardless of whether the endpoints are locally registered (you must have the appropriate option key enabled to use this feature).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IP

 

Address: <IPAddr>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Specifies the IPv4 address of the VCS. Note: You must restart the system for any changes to take effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DNS

 

 

Domain

Name: <S: 0, 128>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Specifies the name to be appended to the host name before a query to the DNS server is executed. Used only when attempting to

 

 

 

 

 

 

 

 

 

 

 

resolve a domain name which is not fully qualified for NTP, LDAP, External Manager and Log servers.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Server [1..5]

Address: <S: 0, 39>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sets the IP address of up to 5 DNS servers to be used when resolving domain names.

 

 

 

 

 

 

 

 

 

Gateway: <IPAddr>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Specifies the IPv4 gateway of the VCS. Note: You must restart the system for any changes to take effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Introduction

 

Getting

 

System

 

 

System

 

H.323 &

SIP

 

Registration

 

Zones and

 

Call

 

Firewall

 

Bandwidth

 

Maintenance

 

Appendices

 

 

Started

 

Overview

 

 

Configuration

 

Configuration

 

 

Control

 

Neighbors

 

Processing

 

Traversal

 

Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D 14049.01

 

 

 

 

 

 

 

 

 

 

133

 

 

 

 

 

 

 

 

 

 

 

07.2007

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 133
Image 133
TANDBERG D14049.01 manual H323 Gatekeeper CallSignaling, Tcp, Port