CommandText goes hereReference - xCommand

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

xCommand

LinkAdd

LinkDelete

Locate

OptionKeyAdd

OptionKeyDelete

Introduction

D 14049.01

07.2007

Description

Parameters

Adds and configures a new link.

LinkName(r): <S: 1, 50>

 

Assigns a name to this link.

 

Node1: <S: 1, 50>

 

Specifies the first zone or subzone to which this link will be applied.

 

Node2: <S: 1, 50>

 

Specifies the second zone or subzone to which this link will be applied.

 

Pipe1: <S: 1, 50>

 

Specifies the first pipe to be associated with this link.

 

Pipe2: <S: 1, 50>

 

Specifies the second pipe to be associated with this link.

Deletes a link.

LinkId(r): <1..600>

 

The index of the link to be deleted.

Runs the VCS’s location algorithm to locate the endpoint

Alias(r): <S: 1, 60>

identified by the given alias, searching locally, on neighbors,

The alias associated with the endpoint you wish to locate.

and on systems discovered through the DNS system, within

 

the specified number of “hops”. Results are reported back

HopCount(r): <0..255>

through the xFeedback mechanism, which must therefore

The hop count to be used in the search.

be activated before issuing this command (e.g. xFeedback

 

register event/locate).

Protocol(r): <H323/SIP>

 

The protocol used to initiate the search.

Adds a new option key to the VCS.

Key(r): <S: 0, 90>

 

Specifies the key of the software option to be added.

Deletes a software option key from the VCS.

OptionKeyId(r): <1..64>

 

Specifies the ID of the software option to be deleted.

Getting

System

 

System

 

H.323 &

SIP

Registration

 

Zones and

 

Call

 

Firewall

 

Bandwidth

 

Maintenance

 

Appendices

Started

Overview

 

Configuration

 

Configuration

 

Control

 

Neighbors

 

Processing

 

Traversal

 

Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

152

Page 152
Image 152
TANDBERG D14049.01 manual LinkAdd LinkDelete Locate OptionKeyAdd OptionKeyDelete, Pipe1 S 1, Pipe2 S 1