TANDBERG D14049.01 manual CommandText goes hereReference xConfiguration, Https, Ssh

CommandText goes hereReference - xConfiguration

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

Administration

Alternates

Authentication

HTTP	Mode: <On/Off>
	Determines whether HTTP calls will be redirected to the HTTPS port.
	On: calls will be redirected to HTTPS.
	Off: no HTTP access will be available.
HTTPS	Mode: <On/Off>
	Determines whether the VCS can be accessed via HTTPS. This must be On to enable both web interface and TMS access.
	On: HTTPS access is enabled.
	Off: HTTPS access is disabled.
SSH	Mode: <On/Off>
	Determines whether the VCS can be accessed via SSH and SCP.
	On: SSH/SCP access is enabled.
	Off: SSH/SCP access is disabled.
Telnet	Mode: <On/Off>
	Determines whether the VCS can be accessed via Telnet.
	On: Telnet access is enabled.
	Off: Telnet access is disabled.

TimeOut: <0..10000>

Sets the number of minutes that an administration session (HTTPS, Telnet or SSH) may be inactive before the session is timed out. A value of 0 turns session time outs off.

Alternate [1..5]	Address: <S: 0, 128>
	Specifies the IP address of an alternate VCS. Up to 5 alternates may be configured. When the VCS receives a Location Request, all alternates will also be
	queried.
Credential	Name: <S: 0, 255>
[1..2500]	Defines the name for this entry in the local authentication database.
	Password: <S: 0, 50>
	Defines the password for this entry in the local authentication database.

Database: <LocalDatabase/LDAPDatabase>

Selects the database to be used for the storage of password information for authentication.

LocalDatabase: the local database will be used.

LDAPDatabase: a remote LDAP repository will be used.

Introduction	Getting	System	System	H.323 & SIP	Registration	Zones and	Call	Firewall	Bandwidth	Maintenance	Appendices
	Started	Overview	Configuration	Configuration	Control	Neighbors	Processing	Traversal	Control
D 14049.01					129
07.2007