TANDBERG D14049.01 manual Enabling the use of Administrator Policy, To enable Administrator Policy

Administrator Policy

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

To enable Administrator Policy:

•VCS Configuration > Policy > Administrator. You will be taken to the Administrator Policy page.

•xConfiguration Policy AdministratorPolicy Mode

Once you have enabled the use of

Administrator Policy, you must define

the policy to be used. This is done

either via the web interface or by uploading a CPL script.

If Administrator Policy is on but a policy has not been configured, then a default policy will be applied that allows all calls, regardless of source or destination.

Enabling the use of Administrator Policy

Administrator Policy Mode

On: Administrator Policy is enabled. If a CPL script has been uploaded, this policy will be used. Otherwise, the policy configured via the Administrator Policy section will be used.

Off: Administrator Policy is not in use.

Save

You must click here for any changes to the

Administrator Policy Mode to take effect.

Introduction	Getting	System	System	H.323 & SIP	Registration	Zones and	Call	Firewall	Bandwidth	Maintenance	Appendices
	Started	Overview	Configuration	Configuration	Control	Neighbors	Processing	Traversal	Control
D 14049.01					64
07.2007