TANDBERG D14049.01 manual CommandText goes hereReference xCommand, XCommand Description Parameters

CommandText goes hereReference - xCommand

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

xCommand	Description	Parameters
AllowListAdd	Adds an entry to the Allow List.	PatternString(r): <S: 1, 60>
		Specifies an entry to be added to the Allow List. If one of an endpoint’s aliases matches one of the patterns in the Allow
		List, the registration will be permitted.
		PatternType: <Exact/Prefix/Suffix/Regex>
		Specifies whether the entry in the Allow List is a prefix, suffix, regular expression, or must be matched exactly.
AllowListDelete	Deletes an entry from the Allow List.	AllowListId(r): <1..2500>
		The index of the entry to be deleted.
Boot	Reboots the VCS.	none
CheckBandwidth	A diagnostic tool that returns the status and route (as a list	Node1(r): <S: 1, 50>
	of nodes and links) that a call of the specified type and band-	The subzone or zone from which the call originates.
	width would take between two nodes.
	Note that this command does not change any existing system	Node2(r): <S: 1, 50>
	configuration.	The subzone or zone at which the call terminates.
		Bandwidth(r): <1..100000000>
		The requested bandwidth of the call (in kbps).
		CallType(r): <Traversal/NonTraversal>
		Whether the call type is Traversal or Non Traversal.
CheckPattern	A diagnostic tool that allows you to check the result of an	Target(r): <S: 1, 60>
	alias transform (local or zone) before you configure it on the	The original alias.
	system. Note that this command does not change any existing
	system configuration.	Pattern(r): <S: 1, 60>
		The pattern against which the alias is to be compared.
		Type(r): <Exact/Prefix/Suffix/Regex>
		The way in which the pattern must match the alias in order for the transform to be applied.
		Behavior(r): <Strip/Replace>
		The way in which the alias will be modified.
		Replace: <S: 1, 60>
		(Applies only if Behavior is set to Replace.)
		The string to be substituted for the part of the alias that matched the pattern.

Introduction	Getting	System	System	H.323 & SIP	Registration	Zones and	Call	Firewall	Bandwidth	Maintenance	Appendices
	Started	Overview	Configuration	Configuration	Control	Neighbors	Processing	Traversal	Control
D 14049.01					149
07.2007