TANDBERG D14049.01 manual Configuring your FindMe User Account

Using TANDBERG’s FindMe™

TANDBERG VIDEO COMMUNICATIONTANDBESERVERG ADMINISTRATORADMINISTRATORGUIDEGUIDE

Configuring your FindMe User Account

!If no devices are configured for a FindMe name, all calls to that name

will be rejected.

Username

The username for this FindMe account.

FindMe name

The FindMe name being configured.

Type

Select whether this FindMe name is to apply to an individual or a group of people. This will affect how calls are diverted to the Busy devices.

Change Password

Click here to change the password used to access your FindMe account. You will be taken to a new page where you can enter the new password.

Log Out

Primary Devices

List the all the device(s) that will ring when your FindMe name is first dialled.

If more than one device is listed here, they will all ring at the same time.

Ring the primary devices

Select the amount of time in seconds you wish the devices in the Primary list to ring before the call is diverted. Alternatively, you can specify that the devices will ring until the caller hangs up.

No Answer Devices

List all the device(s) that will ring if none of the devices in the Primary list are answered within the specified time.

If no devices are listed here, the caller will receive a “no answer” response if none of the Primary devices are answered.

If you have selected a Timeout period of ring until caller hangs up, you will not be able to list any devices here.

Click here to exit the FindMe account configuration page.

Save Changes

Click here to update your FindMe account with any changes.

Busy Devices

For an individual, list all the device(s) that will ring immediately if any of the devices in the Primary list are busy.

Ensure that none of

the Primary devices are set to

Autoanswer. If they are, the

Adding a device to a list

You can have up to five devices in each list. To add a device to any of the lists, enter one of the following in any of the available fields:

•for video endpoints: enter any URL or alias with which the device is registered.

•for 3G mobile phones: to route video to your mobile phone, you must have a 3G gateway - enter the gateway’s prefix followed by the mobile phone number. To route voice only, enter the mobile phone number along with any prefixes required by your dial plan for external calls.

•for telephones: enter the extension number (for internal calls) or telephone number, along with any necessary prefixes.

Removing a device

To remove

adevice from a list, simply delete the text from the relevant field.

For a group of people, list all the device(s) that will ring immediately if all of the devices in the Primary list are busy. (If some of the devices in the Primary list are busy, the rest will continue to ring for the specified time before the call will divert to the devices listed here.)

If no devices are listed in this section, the caller will get a busy response if any/all of the Primary devices are busy.

system will consider the call to have been answered when Autoanswer is initiated, and so it will not divert the call to any other devices.

Introduction	Getting	System	System	H.323 & SIP	Registration	Zones and
	Started	Overview	Configuration	Configuration	Control	Neighbors
D 14049.01					73
07.2007

Call	Firewall	Bandwidth	Maintenance	Appendices
Processing	Traversal	Control