TANDBERG D14049.01 manual Adding and Configuring DNS Zones, Click Create Zone

URITextDialinggoeshere

TANDBERG VIDEO COMMUNICATIONTANDBESERVERG ADMINISTRATORADMINISTRATORGUIDEGUIDE

Adding and Configuring DNS Zones

In order for locally registered endpoints to use URI dialing through the VCS, you must configure at least one DNS zone. To do this:

•VCS Configuration > Zones.

You will be taken to the Zones page. Click New.

You will be taken to the Create Zone page. Enter a Name for the zone and select a Type of DNS.

Click Create Zone.

You will be taken to the Edit Zone page.

•xCommand ZoneAdd

•xConfiguration Zones Zone [1..200]

Normal zone pattern matching and prioritization rules will apply to DNS zones.

When dialing by URI, the hop count

used is that configured for the DNS

zone that matches the URI address.

If there is no DNS zone configured that matches the URI address, then the query may be forwarded to a neighbor. In this case, the hop count used will be that configured for the neighbor zone.

Getting System

Introduction Started Overview

D 14049.01

07.2007

URI Dialing for Outgoing Calls

System	H.323 &	SIP	Registration	Zones and	Call	Firewall
Configuration	Configuration		Control	Neighbors	Processing	Traversal

83

Name

Assigns a name to this zone.

Type

For DNS zones, this will be DNS.

Hop count

Specifies the hop count to be used when sending an alias search request to this zone. If the search request was received from another zone and already has a hop count assigned, the lower of the two values will be used.

H.323 mode

Determines whether or not H.323 calls will be allowed to this zone.

SIP mode

Determines whether or not SIP calls will be allowed to this zone.

Match1 - Match5

These sections allow you to specify any filtering criteria you wish to apply to this zone.

See Configuring Matches for DNS zones for full information on how the Match options can be used.

Bandwidth

Control Maintenance Appendices