TANDBERG D14049.01 manual Zones TraversalServer TCPProbe KeepAliveInterval Cont, RetryCount

CommandText goes hereReference - xConfiguration

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

Zones	Zone [1..200]	TraversalServer	TCPProbe	KeepAliveInterval: <1..65534>
cont...	cont...	cont...		Sets the interval (in seconds) with which the traversal client will send a TCP probe to the VCS once a call is
				established, in order to keep the firewall’s NAT bindings open.
				RetryCount: <1..65534>
				Sets the number of times the traversal client will attempt to send a TCP probe to the VCS.
				RetryInterval: <1..65534>
				Sets the frequency (in seconds ) with which the traversal client will send a TCP probe to the VCS.
			UDPProbe	KeepAliveInterval: <1..65534>
				Sets the interval (in seconds) with which the traversal client will send a UDP probe to the VCS once a call is
				established, in order to keep the firewall’s NAT bindings open.

RetryCount: <1..65534>

Sets the number of times the traversal client will attempt to send a UDP probe to the VCS.

RetryInterval: <1..65534>

Sets the frequency (in seconds) with which the traversal client will send a UDP probe to the VCS.

Type: <Neighbor/TraversalClient/TraversalServer/ENUM/DNS>

Determines the nature of the specified zone, in relation to the Local Zone.

Neighbor: the new zone will be a neighbor of the Local Zone.

TraversalClient: there is a firewall between the zones, and the Local Zone is a traversal client of the new zone.

TraversalServer: there is a firewall between the zones and the Local Zone is a traversal server for the new zone.

ENUM: the new zone contains endpoints discoverable by ENUM lookup.

DNS: the new zone contains endpoints discoverable by DNS lookup.

Introduction	Getting	System	System	H.323 & SIP	Registration	Zones and	Call	Firewall	Bandwidth	Maintenance	Appendices
	Started	Overview	Configuration	Configuration	Control	Neighbors	Processing	Traversal	Control
D 14049.01					148
07.2007