TANDBERG D14049.01 manual BandwidthControl, Creating a Subzone, XCommand SubZoneAdd

BandwidthControl

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

Creating a Subzone

To add a new subzone:

•VCS Configuration > Local Zone > Subzones. You will be taken to the Subzones page. Select New.

You will be taken to the Create Subzone page.

•xCommand SubZoneAdd

Name

Enter the name you wish to assign to the subzone. You will refer to this name when creating Links.

Subnet

Enter the IP address of the subnet. In conjunction with the Prefix, this will define the range of IP addresses that will belong to this subzone.

Prefix

Enter the number of bits of the Subnet IP Address which must match for an IP address to belong in this subzone.

For example:

255.255.0.0 is equivalent to a prefix length of 16 255.255.255.0 is equivalent to a prefix length of 24

Bandwidth

See Applying Bandwidth Limitations to Subzones for a description of these fields.

Create Subzone

Click here to create the subzone and return to the subzones page.

Introduction	Getting	System	System	H.323 & SIP	Registration	Zones and	Call	Firewall	Bandwidth	Maintenance	Appendices
	Started	Overview	Configuration	Configuration	Control	Neighbors	Processing	Traversal	Control
D 14049.01					111
07.2007