TANDBERG D14049.01 manual Enum

CommandText goes hereReference - xConfiguration

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

Zones	LocalZone	TraversalSubZone	Bandwidth	PerCall	Mode: <None/Limited/Unlimited>
cont...	cont...				Determines whether there is a limit on the bandwidth of any one traversal call be-
					ing handled by the VCS.
					None: no bandwidth will be available.
					Limited: there will be a limit on the bandwidth.
					Unlimited: there will be no limit on the bandwidth.
					Limit: <1..100000000>
					(applies only if Mode is set to Limited)
					Specifies the bandwidth limit (in kbps) applied to any one traversal call being
					handled by the VCS.
				Total	Mode: <None/Limited/Unlimited>
					Determines whether or not there is a limit to the total bandwidth of all traversal
					calls being handled by the VCS.
					None: no bandwidth will be available.
					Limited: there will be a limit on the bandwidth.
					Unlimited: there will be no limit on the bandwidth.
					Limit: <1..100000000>
					(applies only if Mode is set to Limited)
					Specifies the total bandwidth (in kbps) allowed for all traversal calls being handled
					by the VCS.
	Zone [1..200]	ENUM	DNSSuffix: <S: 0, 128>
			Specifies the domain to be appended to the transformed E.164 number to create an ENUM host name which this zone is then queried
			for.
		H323	Mode: <On/Off>
			Determines whether H.323 calls will be allowed to and from this zone.
			On: H.323 calls will be allowed.
			Off: H.323 calls will not be allowed.

HopCount: <1..255>

Specifies the hop count to be used when sending an alias search request to this zone.

Note: if the search request was received from another zone and already has a hop count assigned, the lower of the two values will be used.

Introduction	Getting	System	System	H.323 & SIP	Registration	Zones and	Call	Firewall	Bandwidth	Maintenance	Appendices
	Started	Overview	Configuration	Configuration	Control	Neighbors	Processing	Traversal	Control
D 14049.01					144
07.2007