ENUMText goesDialinghere

TANDBERG VIDEO COMMUNICATIONTANDBESERVERG ADMINISTRATORADMINISTRATORGUIDEGUIDE

Configuring ENUM Zones

In order for locally registered endpoints to use ENUM dialing, you must configure an ENUM zone for each ENUM service used by remote endpoints. To do this:

VCS Configuration > Zones.

You will be taken to the Zones page.

Click New.

You will be taken to the Create Zone page.

Enter the zone Name and select a Type of ENUM.

Click Create Zone.

You will be taken to the Edit Zone page.

xCommand ZoneAdd

xConfiguration Zones Zone [1..200]

Any number of ENUM zones may be

configured on the VCS.

You should configure at least one ENUM zone for each DNS suffix that your endpoints may use.

Normal zone pattern matching and prioritization rules will apply to ENUM zones.

ENUM Dialing for Outgoing Calls

Name

Assigns a name to this zone.

Type

For ENUM zones, this will be ENUM.

Hop count

Specifies the hop count to be used when sending an alias search request to this zone. If the search request was received from another zone and already has a hop count assigned, the lower of the two values will be used.

DNS suffix

The DNS zone that is to be queried for a NAPTR record. This suffix is appended to the transformed E.164 number in an attempt to find a matching NAPTR record.

H.323 mode

Determines whether or not H.323 records will be looked up for this zone.

SIP mode

Determines whether or not SIP records will be looked up for this zone.

Match1 - Match5

These sections allow you to specify any filtering criteria and/or transforms you wish to apply to this zone. See Configuring Matches for ENUM zones and Configuring Transforms for ENUM zones for full information on how the Match options can be applied.

Introduction

Getting

System

System

H.323 & SIP

Registration

Zones and

Call

Firewall

Bandwidth

Maintenance

Appendices

Started

Overview

Configuration

Configuration

Control

Neighbors

Processing

Traversal

Control

 

 

 

D 14049.01

 

 

 

 

90

 

 

 

 

 

 

07.2007

 

 

 

 

 

 

 

 

 

 

Page 90
Image 90
TANDBERG D14049.01 manual Configuring Enum Zones, For Enum zones, this will be Enum