Managing Zones, Neighbors and Alternates

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

Adding Zones

Configuring Zones

In order to neighbor with another system (e.g. VCS, gatekeeper or Border Controller) or create an ENUM or DNS zone, you must add a new zone on the local VCS. When adding a new zone you will be asked to specify its Type; this will determine which configuration options will then be available.

To create a new zone:

VCS Configuration > Zones.

You will be taken to the Zones page. Click New.

You will be taken to the Create Zone page.

xCommand ZoneAdd

Name

Enter the name you wish to give to this zone. The name acts as a unique identifier, allowing you to distinguish between zones of the same type.

Type

From the Type drop-down menu, select the type of zone you wish to add.

Once the zone has been created, the Type cannot be changed.

Create Zone

Click here to create the zone. You will be taken directly to the Edit Zone page.

Cancel

Click here to return to the Zones page without creating the zone.

Once you have created a new zone on the local VCS you must configure it appropriately. For traversal server zones, traversal client zones and neighbor zones this will include providing information about the neighbor system such as IP address and ports.

Zones are configured via the Edit Zone page. You will be taken to this page automatically upon creation of a new zone. To access this page for an existing zone:

VCS Configuration > Zones.

You will be taken to the Zones page. Click on the name of the zone you wish to configure.

You will be taken to the Edit Zone page.

xConfiguration Zones Zone [1..200]

The sections that follow describe the configuration options available for each zone type.

Introduction

Getting

System

System

H.323 & SIP

Registration

Zones and

Call

Firewall

Bandwidth

Maintenance

Appendices

Started

Overview

Configuration

Configuration

Control

Neighbors

Processing

Traversal

Control

 

 

 

D 14049.01

 

 

 

 

52

 

 

 

 

 

 

07.2007

 

 

 

 

 

 

 

 

 

 

Page 52
Image 52
TANDBERG D14049.01 manual Adding Zones Configuring Zones, XCommand ZoneAdd, Create Zone, XConfiguration Zones Zone