TANDBERG D14049.01 manual Using the Command Line Interface CLI

Getting Started

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

System Administrator Access

Using the Command Line Interface (CLI)

The command line interface is available over SSH, Telnet and through the serial port.

To use the command line interface: . Start a SSH or Telnet session.

. Enter the IP address or FQDN of the VCS.

3.Login with a username of admin and your system password.

Commands are divided into different groups according to their function:

xStatus	These commands return information
	about the current status of the system.
	Information such as current calls and
	registrations is available through this
	command group.
xConfiguration	These commands allow you to add and
	edit single items of data such as IP
	address and zones.
xCommand	These commands allow you to add and
	configure items and obtain information.
xHistory	These commands provide historical
	information about calls and registrations.
xFeedback	These commands provide information
	about events as they happen, such as
	calls and registrations.

See the Command Reference Appendix for a full description of commands available on the VCS.

In this Administrator Guide, instructions for performing a task using the command line interface are shown in the format:

•xConfiguration CommandName

Typing the given command into the CLI will return a full list of options and parameters available for that command.

Typing a ? after the command will return information about the purpose of that command or group of commands.

Introduction	Getting	System	System	H.323 & SIP	Registration	Zones and	Call	Firewall	Bandwidth	Maintenance	Appendices
	Started	Overview	Configuration	Configuration	Control	Neighbors	Processing	Traversal	Control
D 14049.01					17
07.2007