Firewall Traversal

TANDBERG VIDEO COMMUNICATION SERVER ADMINISTRATOR GUIDE

Configuring a Traversal Client Zone

VCS Configuration > Zones.

You will be taken to the Zones page. Click on the name of the zone you wish to configure.

You will be taken to the Edit Zone page.

xConfiguration Zones Zone

Getting System

Introduction Started Overview

D 14049.01

07.2007

Configuring the VCS as a Traversal Client

Retry interval

Specifies the interval in seconds with which a failed attempt to establish a connection to the traversal server should be retried.

H.323 mode

Determines whether H.323 calls will be allowed to and from this zone.

H.323 protocol

Determines which of the two firewall traversal protocols to use for calls to the traversal server.

H.323 port

Specifies the port on the traversal server to be used for H.323 firewall traversal calls.

SIP mode

Determines whether SIP calls will be allowed to and from this zone.

SIP port

Specifies the port on the traversal server to be used for SIP calls from this VCS

SIP transport

Determines which transport type will be used for SIP calls to and from the traversal server.

Remember to Save your changes.

Primary address

 

 

 

 

 

Specifies the IP address or FQDN of the

 

 

 

traversal server.

 

 

System

H.323 & SIP

Registration

Zones and

Call

Firewall

Configuration

Configuration

Control

Neighbors

Processing

Traversal

102

Alternate 1 - Alternate 5 Address

Specifies the IP addresses or FQDNs of any alternates configured on the traversal server.

Bandwidth

Control Maintenance Appendices

Page 102
Image 102
TANDBERG D14049.01 manual Configuring a Traversal Client Zone, Alternate 1 Alternate 5 Address