D 14049.01
07.2007 68
Text goes here
Introduction Getting
Started
System
Overview
System
Configuration
H.323 & SIP
Configuration
Registration
Control
Zones and
Neighbors
Call
Processing
Firewall
Traversal
Bandwidth
Control Maintenance Appe ndices
Text goes here
Call
Processing
TANDBERG VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Call
Processing
User Policy
Enabling User Policy on the VCS
Save
Click here to save your changes.
Mode
Determines whether or not User Po licy will be
enabled, and if so, the location of t he User
Policy Manager.
Off: User Policy is not enabled .
Local: User Policy is enabled and th e VCS’s
own User Policy Manager is used.
Remote: User Policy is enabled and a User
Policy Manager located on anot her system
is used. If you select this option, fu rther
configuration options will ap pear (see below).
Configuring User Policy Manager
To configure the User Policy Manager:
VCS Configuration > Policy > User.
You will be taken to the User Policy page.
xConfiguration Policy UserPolicy

Path

The URL of the remote User Policy Man ager.
Username
The username used by the VCS to log in a nd
query the remote User Policy M anager.

Protocol

The protocol used to connect to t he remote
User Policy Manager.

Address

The IP address or domain name of t he remote
User Policy Manager.
Password
The password used by the VCS to log in an d
query the remote User Policy M anager.
Administrator Policy will always b e
applied regardless of the User Pol icy
mode.