Enhanced Digital Integration
Standby mode
While in Standby mode, the MLA icon indicates which handset line will be active the next time the handset is used to place a call (see Figure 7.1).
Select Line
To select another line, use the Left Soft key to choose Menu. Use the Scroll key to navigate to the Settings menu, then press the Left Soft key to select.
In the Settings menu, use the Left Soft key to select Call Options, then use the Left Soft key to choose Select Line. Use the Scroll key to view available (idle) lines. Once the desired line is displayed, use the Left Soft key to choose Connect (see Figure 7.2).
Answer a call
An incoming call can be indicated by:
•Audible ring tone
•Display message
•Flashing Off Hook icon
•Lighted display
•Flashing red light indicator
•Vibration of handset
Option 1
Ignore the call
Option 2
Press the Off Hook key or the Left Soft key to select Accept.
Option 3
Pressing the Right Soft key to select Decline.
Option 4
Mute the call by pressing the Mute button.
Option 5
Use the Scroll key to review the state of all lines. Select an idle line to access a new line and generate a new dial tone. To answer an incoming call on another ringing line, press the Off Hook key or the Left Soft key to choose Accept.
The options above also apply to call waiting.
16
Figure 7..1
MLA Icon indicates line 1 is active.
Figure 7..2
EDI configuration is applicable when there is a digital interface to a Nortel or Avaya Private Branch Exchange (PBX).Confirm with the system administrator that your installation supports enhanced features such as caller line ID and Multiple Line Appearance (MLA). To access features such as transfer, conference, hold, and reconnect, callback and cancel callback, please refer to the In Call Menu Options section of this guide.