In Call Menu Operation | Menu Options |
|
20 |
Conference
Depending on system configuration, a conference call can be invoked in two ways.
Option 1. Pre-conference
Used with the EDI interface to Meridian and Avaya PBXs, and with all analog and T1 CAS PBX interfaces.
1.During an active call use the Left Soft key to select Options.
2.Use the down arrow of the Scroll key to browse to Conference and use the Left Soft key to select this option.
3.Use the keypad to enter the second handset number for the conference call.
4.Use the Left Soft key to select Connect to complete the conference call.
5.Use the Left or Right Soft keys to confirm or cancel the transfer by selecting the Left Soft key for Yes and the Right Soft key for No.
Option 2. Post-conference
Used with the EDI interface to Norstar and with the Mobility Server configuration.
1.During an active call, use the Left Soft key to select Options.
2.Use the up and down arrows of the Scroll key to browse to Select Line, then use the Left Soft key to select this option.
3.Use the up and down arrows of the Scroll key to select an idle line.
4.Use the Left Soft key to select Connect. This will place the original call on hold.
5.Dial the telephone number of the second party.
6.Once the call to the second party is connected, use the Left Soft key to select Options.
7.Use the up and down arrows of the Scroll key to browse to Conference.
8.Use the Left Soft key to choose Select and connect all parties to the conference call.
Depending on configuration, some of the following features may not be available. Check with your system administrator to determine if your 9p23 portable handset is enabled for Limited or Full Menu support.
The following sections describe each of the 9p23 portable handset menus and the settings available. The
9p23 handset menus enable users to:
•Store and recall handset numbers in memory
•Retrieve voice mail messages
•Read Text messages
•Set up call features
•Change ring tone and other sound settings
•Change other handset settings
Open main menus
To navigate and modify the menu settings, while the handset is in Standby mode, use the Left Soft key to select Menu to enter the Main menu navigation (see Figure 8.1). Use the up and down arrows of the Scroll key to Scroll through the Main menu structure. Use the Left Soft key to Select a Main menu option. The six menu options within the Main menu:
•Interactive Communication Services
•Messages
•Call Info
•Phone Book
•Sound Setup
•Settings
Each of these Main menu options contain submenus that enable the user to configure different functions.
Figure 8..1
Change handset settings
Once the Main menu is opened, use the Left Soft key to Select a Main menu option.
1.Use the up and down arrows of the Scroll key to browse through the list of submenu options.
2.Use the Left Soft key to select the option displayed in brackets “< >” (see Figure 8.1)