Getting Started
The 9p23 portable handset is delivered with the standard belt clip. If there is a need to replace the belt clip, see instructions below.
Step one: remove the belt clip
To detach the belt clip from the handset:
1.Loosen the retention screw of the belt clip from the handset (see Figure 2.2).
2.Slide the metal clip upward in the slot (see Figure 2.3).
Step two: attach the belt clip
To attach the belt clip to the handset:
1.Slide the metal bar on the clip into the molded slot on the back of the handset until it snaps into place (see Figure 2.1).
2.Tighten the retention screw to secure the belt clip onto your handset (see Figure 2.2).
The radio frequency (RF) performance of the 9p23 portable handset will degrade significantly when the belt clip is removed or modified. Do not remove or modify the belt clip for normal use without first consulting Ascom.
Figure 2..1
Belt clip
Figure 2..2
Retention screw
Figure 2..3